Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU input shaft??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 12
Joined: Mon Dec 01, 2008 9:18 pm
Location: Australia

GU input shaft??

Post by BUSHY_GU »

Hey, does anyone know if the input shaft on the tb45 gearbox will fit in the td42. Thanks
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

Not quite sure what you are asking.? What do you want to do.
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Posts: 12
Joined: Mon Dec 01, 2008 9:18 pm
Location: Australia

Post by BUSHY_GU »

i want to know if the spline from the tb45 box will go into the back of the td42 motor
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

Yes it will. I am running a TD42T GU box in my TB45. The clutches are also interchangeable with TB45 and TD42. The GU's came with a few different ratio's so if you wanted to swap the input shafts you would need to check that the ratio's are the same.

The different GU ratio's are listed here.

http://www.mcs.net.au/~grungle/specifications.html

Also the new common rail ZD30 Patrols on Nissan Australia's webpage have now changed back to the lower ratio 4.556:1 first gear.
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests