Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BenT's adaptor kit photo's needed

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 32
Joined: Sun Feb 10, 2008 4:46 pm
Location: townsville

BenT's adaptor kit photo's needed

Post by tazmanier »

Howdy all, just a quicky.
Would i be able to get a few pic's of the "box section engine mount adaptor" on the drivers side engine mount from BenT's kit, installed if there handy. had the engineer over just before i installed the engine and he was huming and harring about it. a few pics of installed ones (engineered if possable) might allow him to work out some loads, or something. . wateva engineers gave 4-5yrs of there life for.
Top
Posts: 120
Joined: Thu Feb 07, 2008 7:53 am
Location: Chur Bay, New Zealand

Contact:
Contact Mudbits

Post by Mudbits »

Here are a couple i have on file but you can hardly see it in there.

Image

Image
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

thats a bit unlucky about your engineer mate,when i got mine done (but in NSW) i pointed out the engine mount and adaptor plate and he replied oh yeh no worries that will work a treat haha
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 32
Joined: Sun Feb 10, 2008 4:46 pm
Location: townsville

Post by tazmanier »

yea Im thinking he thought it might have been an extension arm back to the mounting point now that iv looked at it again. doesnt help that i had the origional engine mount hanging off of it with a bolt to keep it out of the way :roll: Was more intrested in talking about my lux diffs that i had sitting there than explaining the engine mount at the time. anyways mudbits pic might show him wats going on, cheers mate!
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Well timed thread, I was looking for the maker of the adapter plates and who was selling the two inch bodylifts ... In opening two threads I have found both..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Think he had the adapter kit on ebay for some non installed pics.

Do you still need pics? as i can do a couple of mine if necessary
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests