Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.6 16vlave EFI Air flow meter Wiring colours to Plug

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

1.6 16vlave EFI Air flow meter Wiring colours to Plug

Post by A1 »

Hey All Yes I should search but due to trying to get my Vit ready for TT I need yas Help .......

As Post states I'm after the wire colour codes to Pin locations on the plug that fits into the air flow meter ....


Just checking as I have had to lengthen the wires due to running the intake into the cab and running a POD filter under the dash .... ( I also done away with that air chamber doodad that hangs off the side of the intake pipe ...? this wouldnt cause the rig to run like a bitch coughn and spluttering ??? so I want to check I didnt fark up the re wire of the plug ...


Thanks

Dan
[b][i] DAN [/i] [/b]


:silly:
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

when u removed the air chamber thingo did u block it up?

as when i took that off mine but otherwise stock it would stall out. and not easy to start.

what airflow meter do u have? how many pins in there. (roughly what age motor also)
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Yes blocked up the hole with a stainless Bung I made...

um Im at wrk doing sum stuff for the rig :roll: ....I would say about 6pin at a guess :?


Year of car / Donk 94


cheers for the reply Nic ,



Dan
[b][i] DAN [/i] [/b]


:silly:
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

Image
pm me your email address and i'll email it to you, so you can zoom on the image with pics and fax viewer
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Thanks Jason :armsup:
[b][i] DAN [/i] [/b]


:silly:
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

thats the one.

theres also a later version diagram but think it is only a 4 pin
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Well i was right it was the A/F Meter ...but wasnt wired incorrectly ...seem as though when I must have been putting the corrugate tubing over I must have pulled one the wire (well actually broke) one of the wires .....fixed that and it fired back up with its crispy sound :twisted: ...hoepfully all stays well ova the weekend


thanks again for the info
[b][i] DAN [/i] [/b]


:silly:
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests