Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Repairing GQ door hinges?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 295
Joined: Sun Sep 24, 2006 5:34 pm

Repairing GQ door hinges?

Post by azzad »

My front door hinges in my GQ are pretty much shot.

From what I have read on here and elsewhere the cheap eeeeebay ones aren't worth the effort.

Has anyone tried repairing there's?

I was thinking of either removing the pin and reaming out the holes to the next closest size and putting in a high tensile bolt instead of the pin.

Or

Welding the holes up and re drilling to the right size.

Yes I could go and buy some genuine ones but I don't want to.

What do others use as lube on there hinges as all the stuff I have tried gets dirt and shit stuck to it; just wasted a can of degreaser on 1 side cleaning it up.

Dazza
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Repairing GQ door hinges?

Post by bogged »

buy some used ones.
the pins are hardened from what I read, so will be more shit than its worth
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

pins are soft, they run in a plastic bush. Its the plastic bush that wears out.

I have modded a front set. I replaced the 8mm pin with a 10mm bolt that i drilled and tapped to take a grease nipple.

I welded a steel boss in between the pin holes and drilled the holes out to 13mm.

I then pressed in bronze hatted/flanged bushes with the 10.2mm hole.

The bolts are just lightly tightened with nyloc nuts.

I used bolts with a long sholder so no thread chews he bushes and trimmed the thread down to suit.

I did these in 1998.A LOT of work for door hinges.

You could just cut the 8mm pin out, drill the outer hinge out to 10mm (the inside is already 10mm), and use lond 10mm high tensile bolts. This method is quick and would benifeit from thr occasional lube.
Top
Posts: 68
Joined: Mon Jun 11, 2007 5:23 pm
Location: Queensland

Post by hotturbo »

ebay worked fine for me. i think 40 each of memory from patrolpart
Top
Posts: 12
Joined: Tue Sep 30, 2008 2:35 pm
Location: HUNTER VALLEY

Post by INDYGQ »

I've had ebay one's on mine for 12 months still going great. $55 for both front doors.
Top
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Post by ssfabricator »

i bought ebay ones i have only put one side on and it makes so much noise closing the door its not funny
CREEEEEEEEAAAAAAAAAK CRACK
If i just overtook you head to your nearest mechanic
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

ssfabricator wrote:i bought ebay ones i have only put one side on and it makes so much noise closing the door its not funny
CREEEEEEEEAAAAAAAAAK CRACK
try greasing them lol
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Re: Repairing GQ door hinges?

Post by its aford not a nissan »

azzad wrote:
Has anyone tried repairing there's?

I was thinking of either removing the pin and reaming out the holes to the next closest size and putting in a high tensile bolt instead of the pin.


Dazza

this is what i did and they are working like new again :armsup:
drilled out to 10mm i think
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 79 guests