Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HF1A and HF2A transfers cases

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 22
Joined: Thu Jun 08, 2006 7:50 pm
Location: Tyers

HF1A and HF2A transfers cases

Post by brock »

Hopeing someone can help me here, are these the same housing's externaly? I Am looking at the Marks adapters for the 4l60e auto gearboxs and they can bolt them up to the hf2a transfer, but i want part time 4wd, so am hoping they're the same. And while I'm at it will these tranfers handle 250 ish kw's ?

Thanks in advance.. :)
Top
Posts: 22
Joined: Thu Jun 08, 2006 7:50 pm
Location: Tyers

Post by brock »

Anyone, .......
Top
Posts: 97
Joined: Mon Jun 06, 2005 6:33 pm

Post by tobie »

try on lcool.org u mat get a better response, i imagine the housings are the same
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

the housings are the same except for the selector and the pto window castings

they are good because they have full manual selection for 4x4 and h L
the others have a servo

should bolt up no worries at the front of the case same bolt patern

cheers

jonathan
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Posts: 22
Joined: Thu Jun 08, 2006 7:50 pm
Location: Tyers

Post by brock »

Ahh great, Thanks guys..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests