Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series speed sensor

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

80 series speed sensor

Post by killalux »

Hey, Just a quick question. Does anyone know how many pulses per rev the no.2 speed sensor (on box, not transfer case) puts out in the a343f auto transmission behind a 1fzfe.

Thanks
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

dont know steve, sorry, but the box behind a 4.5 is the a442f. i have a workshop manual, will have a sticky 4 u
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

My Gregorys manual is not much help. Whilst is says to test the transfer one by looking for 4 signals per one revolution of the speed sensor shaft all it says for the secondary sensor is connect an analogue ohmmeter to the terminals and roate the rear wheel and check that the motor needle deflects from zero to infinity ohms.
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Re: 80 series speed sensor

Post by thrashlux »

killalux wrote:Hey, Just a quick question. Does anyone know how many pulses per rev the no.2 speed sensor (on box, not transfer case) puts out in the a343f auto transmission behind a 1fzfe.

Thanks
Steve
Why what are you trying to do?

sounds interesting!!

jonathan
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

I am working on a 80 that has an ls1 fitted in front of the toy auto box, I am trying to set it up so that the ls1 PCM will control the box,
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

killalux wrote:I am working on a 80 that has an ls1 fitted in front of the toy auto box, I am trying to set it up so that the ls1 PCM will control the box,
can you reflash the delco pcm?

jonathan
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

Yes everything in the PCM can be live tuned.

I am just going to trial and error to get it to work, will just run it on the hoist and adjust the signal till the PCM readout matches the speedo.

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests