Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Massive Camber on 92 IFS Sr5 Lux
Moderators: toaddog, Elmo, DUDELUX
Massive Camber on 92 IFS Sr5 Lux
Hey guys, 1st post, how exciting, anyway, I've got Massive camber on my hilux and it cant be taken out with a wheel alignment and they couldnt tell me the cause, Just curious if you guys know of a common cause, i only need a temporary fix as i'm doing an Overkill Engineering solid front conversion, Cheers, Ash
Something must be bent (chassis, arms, etc) or bushes flogged out or ball joint collapsed.
not normal.
I'd be very concerned if you got a wheel alignment and the wheel alignment guys couldn't work out where the problem was. If it was minor they should be able to adjust it out, if its beyond the adjustment then something is seriously bent.
good luck
not normal.
I'd be very concerned if you got a wheel alignment and the wheel alignment guys couldn't work out where the problem was. If it was minor they should be able to adjust it out, if its beyond the adjustment then something is seriously bent.
good luck
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
leehamescort wrote:Something must be bent (chassis, arms, etc) or bushes flogged out or ball joint collapsed.
not normal.
I'd be very concerned if you got a wheel alignment and the wheel alignment guys couldn't work out where the problem was. If it was minor they should be able to adjust it out, if its beyond the adjustment then something is seriously bent.
good luck
Yea Thanks matey, i know the ball joints a flogged out, but i didnt think it would cause this much camber, Anyway, went to the bank just before and applied for a minor mortgage to do the solid conversion. HAHA thanks again
Ash
Who is online
Users browsing this forum: No registered users and 2 guests