Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

busted ifs cv hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 14
Joined: Tue Nov 04, 2008 10:24 am
Location: eastern suburbs melb

busted ifs cv hilux

Post by jackos »

hey guys went out on the weekend and relized iv busted the drivers side cv on my ifs o3 hilux clicking off it's head when turnin. :x

was wondering where in eastern melb i can get a replacement and how hard this is to replace myself

never done 1 before but im shore it wont be the last.
:cry:
Any help appreciated
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

pop into repco. cant remember price, hundred bucks maybe?

easy to replace, just take ya time with it.

http://www.toyotasurf.asn.au/techsite/cvjoints.htm
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 14
Joined: Tue Nov 04, 2008 10:24 am
Location: eastern suburbs melb

Post by jackos »

cheers mate will pull it apart on sunday and replace looks straight forward. are the aftermaket cvs from say bursons as good as genuine toyota aqs their a third of the price.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Go to Hall 4X4 in bayswater and get a good second handy for about $60.

Repco quoted me $220.00 each knew and couldn't even tell me who the manufacturer was.

Better off with a genuine second hand unit then a Chinese knock off new one.

Except maybe the ones Leeham gets.

Cheers
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

leehams CV's going to leehams diff... :D :twisted: :armsup:
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 14
Joined: Tue Nov 04, 2008 10:24 am
Location: eastern suburbs melb

Post by jackos »

i was thinkin may pay to see wat halls has got hes only down the road and 60 bucks is nothin compared to 215 i was quated from bursons.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

jackos wrote:i was thinkin may pay to see wat halls has got hes only down the road and 60 bucks is nothin compared to 215 i was quated from bursons.
Most of them have hardly ever seen 4WD engaged.

Cheers
Posts: 79
Joined: Fri May 16, 2008 8:38 pm
Location: Sydney

Post by AHF01U »

Posts: 499
Joined: Sun Dec 07, 2008 9:31 pm
Location: Anstead- Brisbane

Post by woodbutcher »

I agree with Struth I now only get replacement shafts from the wreckers as they charge me $60 and get a complete toyota shaft that last a lot longer than the chinese one's
Or you can order some from here for $250 plus postage
http://www.yuri4x4.com/
and here is Leehams write up
http://www.yuri4x4.com/yuri_testimonial.php
1990 Toyota Surf with a few minor mod's
1UZFE V8 (Engine Conversion by Me)
Coil SAS 60 series front diff (Done By Me)
No Loka's Damb it_____ Just LSD front and rear
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Post by mellows40 »

Can`t go wrong with Halls 4x4 I get a lot of parts there.. and haven`t had any dramas yet.. plus they are close to home so it saves a trip to dandenong. be carefull about "cheap nock off`s" they will most likely let you down when you least expect it... see the latest issue of 4x4 australia they have a good write up on the differences between genuine and cheeper knock off parts..
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests