Just needing to know if a 5 speed gearbox from a HJ60 cruiser bolt up to a 92 model 4.2 diesel troopy???
I'm guessing that there will be a different bell housing, but is the rest the same???
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gearbox?? 60 Series/troopy interchange???
Moderators: toaddog, Elmo, DUDELUX
Gearbox?? 60 Series/troopy interchange???
When in doubt..... UTE-ERIZE it!!!
Hi mate, the 60 gearbox has a course spline on the input shaft. I have done this swap before but you'll need the 60 clutch plate and your input shaft will only just sit in the spigot bearing(about 3mm). Then you've got a different drive flange on the front transfer output for your driveshaft. The 75 drive flange will fit straight on though. And you will need the 1HZ bellhousing.
COILED 75
Who is online
Users browsing this forum: No registered users and 1 guest