Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Reuse axles after dead cv

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Reuse axles after dead cv

Post by nicbeer »

Hey

Broke first CV joint :)

Axle looks ok so far.

is it possible as i have a couple spare NT cvs to swap the axles over?

Image
Image
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

if splines are ok yes.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

You can, but usually when the CV pops the inner race will expand as well and round off the splines.

So you may get lucky and be able to reuse it, but you might not.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

if the spline looks like this it is no good :lol:
Image
Top
Posts: 60
Joined: Fri Oct 10, 2008 11:16 am
Location: Somerville, Vic

Post by hobzees4wdshop »

Nice effort Nic!

I'd probably replace the whole axles and cv and then keep the old axle as a spare if its in good nick.
[url=http://www.4h.com.au]The 4wd Shop[/url] - (03) 5977 7233

Driveline, winch/winch upgrade, Bullbar, HID, 4"/6" GU/GQ Liftkit, 60/80 Series Liftkit, Recovery, Snorkels, Air.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

oks

sounds good.

we have taken the CV off and the axle is a little bit worn but not too bad. so will fit up the NT cv as a spare and will grabe another one to slot into diff.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

aha good work.. at least you did it properly
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 43 guests