G'day guys i got a VN V6 commy motor in my 4by and am currently trying to figure out were to put a mechanical temp gauge. I have tried it in the heater hose outlet but they are blocked off and it cant get an accurate reading. I have fitted them to V8's before and they screw straight into the manifold, but the V6 is headache. If i run a bit of hose between the heater outlets and then bridge the sensor in with a t-peice will it work?
where have you guys fitted yours?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Holden V6 temp gauge ? where to fit
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 56 guests