Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

my 80 is chewing front radius arm bushes, please help.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Mar 26, 2009 1:47 pm
Location: gatton qld

my 80 is chewing front radius arm bushes, please help.

Post by land8079 »

I was wonderin if any one could shed some light on maby why my 80 is flogging out front radius arm bushes. Its got a five inch lift with caster plates fitted. I keep the wheels balanced and aligned, just did the swivel housings and wheel bearings and all the steering joints,...please help.
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

wat sort of bushes u putting in it?

stick to the std rubber ones!
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Panhard rod & bushes OK ???
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

caster plate welded to housing wrong?
Top
Posts: 34
Joined: Thu Mar 26, 2009 1:47 pm
Location: gatton qld

Post by land8079 »

mule75 wrote:caster plate welded to housing wrong?
the plates are bolt on and yeah ive done the panard rod bushes, rod are also adjustable.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests