Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

thermostat broken bolt

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

thermostat broken bolt

Post by macneil »

changing the thermostat on my new engine and i broke the rear bolt on my td 42 have taken the whole housing off not but the bolt was broken in the timing cover.. tried easy outs but no luck any other methods i can try??
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

this happened to me a few months ago i was spewin :P

so what i did was get an old nut i had lying around about the same thread size as the one broken off and i welded it to the broken stud in the head putting heaps of weld into the nut to get the thread nice n hot to burn off the rust then it came right out with a spanner
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

If you get really stuck you could always try a broken bolt removal specialist (we have one in Brisbane called "Thread Tech"). These guys can get stuff out that nobody else can - they are the true meaning of the word "specialist"
If it's worth doing - it's worth doing to excess ...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest