Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dummy motor (foam)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

dummy motor (foam)

Post by professor »

dummy motors (foam) is there any avalable in oz

I want them for mocking up chassis positions and clearances

1uzfe
5L
6L

gear boxes and transfers would be good to

someone might know of where to get them.

Chad
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

Not sure where you get the foam engines from but most shops just use the gearbox/tranfer cases with no internals as I dont think you can get them in foam.
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

You can cetainly get US motors in plastic/foam.

Don't fancy the chances of the 304/308 or 1UZ though - not enough chassis builders working with them IMHO.

http://www.vanpeltsales.com/FH_web/replica-engines.htm

http://store.summitracing.com/egnsearch ... =sku#rstop

DOHC ford, Cummins, honda... but no 1UZ.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

Gwagensteve wrote:You can cetainly get US motors in plastic/foam.

Don't fancy the chances of the 304/308 or 1UZ though - not enough chassis builders working with them IMHO.

http://www.vanpeltsales.com/FH_web/replica-engines.htm

http://store.summitracing.com/egnsearch ... =sku#rstop

DOHC ford, Cummins, honda... but no 1UZ.

Steve.
Awesome

Thanks
Chad
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

mmm good looking coffee table

but you gotta find a v12 motor i reckon
Top
Posts: 194
Joined: Wed May 04, 2005 9:06 pm
Location: south coast n.s.w.

Post by croozy »

I'm making one now
it's never a problem until it can't be fixed, even then it' only a minor set back
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 80 guests