hey im looking to buy a standard hilux dualcab 4x4 93 model 2.8 diesel.
I would like to lift it roughly 6 inches and was jst wondering what this would involve and roughly how much it would set me back? thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lifting a hilux
Moderators: toaddog, TWISTY, V8Patrol, Moderators
so many ways to skin a cat. and depends a bit what you want the end product to achieve.
is it for clearance? or bigger tyres? if what size. as the extra mods you could require for certain goals will change methods and costs.
will it still be your road car?
you would probably go 4inch springs, 2 inch body lift kit, longer shocks, longer brake lines, drop drag link and probably some other stuff if keepingit basic.
but may also need.
if you have a 2 piece tail shaft then its gonna kill center bearings so maybe a 1 piece tail shaft or a rotated f/r diff.
if its to fit tyres 33 + then you will probably need to shift you front diff forward as well.
do some serches on this stuff and check out other peopes builds in the members thread for info an what worked for them.
is it for clearance? or bigger tyres? if what size. as the extra mods you could require for certain goals will change methods and costs.
will it still be your road car?
you would probably go 4inch springs, 2 inch body lift kit, longer shocks, longer brake lines, drop drag link and probably some other stuff if keepingit basic.
but may also need.
if you have a 2 piece tail shaft then its gonna kill center bearings so maybe a 1 piece tail shaft or a rotated f/r diff.
if its to fit tyres 33 + then you will probably need to shift you front diff forward as well.
do some serches on this stuff and check out other peopes builds in the members thread for info an what worked for them.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
thanks for that mate, as for the centre bearings i thought chewing through them may come into play as my mate lifted his hilux and put spacers in to drop the tailshaft to give it a straight line which seems to work good..im hoping to fit 35's and yeah it will be my road car as well as my weekend playtoy.
Why lift it 6"?
It would handle like crap.
Mine only had 2" in springs and extended shackles and they only rub on the firewall with 35"s. I feel even this is too high for a hilux.
It would handle like crap.
Mine only had 2" in springs and extended shackles and they only rub on the firewall with 35"s. I feel even this is too high for a hilux.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
hey mate,
i agree with hanko here, there's so many ways to go about it. I would personally go 2" in the springs, 2" in the shakles and 2" on the body. What weiner has is a pretty good setup and you don't need to do much more than that in my opinion.
BTW i've fit 33x12.5's to my 2" lifted lux with minimal scrubing at full twist.
Good luck with it all though
i agree with hanko here, there's so many ways to go about it. I would personally go 2" in the springs, 2" in the shakles and 2" on the body. What weiner has is a pretty good setup and you don't need to do much more than that in my opinion.
BTW i've fit 33x12.5's to my 2" lifted lux with minimal scrubing at full twist.
Good luck with it all though
[b]Cheers Big Al[/b]
What do you mean 2inch and 31's doesnt stand out? of course not, standing out and looking cool is not the objective most people aspire to.
2inch and a few other mods is enough for 35s not to scrub and not fall over on its lid on angles. 35s on road on a hilux is asking to be done up the bum by the police, 8inchs on a lux on 35s driven on the street is nothing more than a city gutter jumper imo.
mine has 2-3 inchs and 35s, the front has about 3 or 4 inchs of clearance to the firewall, and 31's for on the road, it doesnt look as cool as some of the skyhigh hiluxs
, but would love to see them look cool offroad haha.
2inch and a few other mods is enough for 35s not to scrub and not fall over on its lid on angles. 35s on road on a hilux is asking to be done up the bum by the police, 8inchs on a lux on 35s driven on the street is nothing more than a city gutter jumper imo.
mine has 2-3 inchs and 35s, the front has about 3 or 4 inchs of clearance to the firewall, and 31's for on the road, it doesnt look as cool as some of the skyhigh hiluxs
, but would love to see them look cool offroad haha.BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
for the cops always been after me about it i shoudl be fine.i spoke to one of my mates who does 4x4 mods and he had a patrol on 37's with 9 inch lift and he only got pulled over once and tht was a rbt. i have a mate in highway patrol and he said as long as the headlights are under 1200 from the ground im sweet if i get pulled over.
I suggest you do some more research as basically your mate is wrongmattress_821 wrote:for the cops always been after me about it i shoudl be fine.i spoke to one of my mates who does 4x4 mods and he had a patrol on 37's with 9 inch lift and he only got pulled over once and tht was a rbt. i have a mate in highway patrol and he said as long as the headlights are under 1200 from the ground im sweet if i get pulled over.
Also if all you want to do is run huge lift and join the growing list of ex ricers trying to ruin the 4wd scene as they did the car scene with ridiculous cop bait mods then please go and find another sport.
The information above shows you how to have a capable safe and legal rig, personally I am over the tools like your mate with 9" lift and 37s ruining it for everyone else
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
i want something that looks tough as well as capable off road. im not one of those f%^&wits that drive around town that hav never taken there 4X4 off road. i was told by manell motors down near newcastle that lift would be fine just not the tyres. they have an engineer that does there work and he said it could be engineered with smaller tyres.im only passing on what ive been told
For offroading you only need a mild lift, then its trim guards and bumpers if needed to make the biggest tyres fit for that mild lift.
you'll get great performance offroad and still have a decent Centre of Gravity so you wont roll the thing over the first small boulder you come across.
working on approach and departure angles can benefit you alot more at times than a lift can.
gaining 2 inch more approach angle at the same lift is just as good as lifting it 2 inches extra except you havent raised your COG.....make sense?
you'll get great performance offroad and still have a decent Centre of Gravity so you wont roll the thing over the first small boulder you come across.
working on approach and departure angles can benefit you alot more at times than a lift can.
gaining 2 inch more approach angle at the same lift is just as good as lifting it 2 inches extra except you havent raised your COG.....make sense?
[url]http://www.monsterrides.com.au[/url]
Mate, I dont have as much experience with older trucks as others on here, but Id recommend a 2" body and 2" suspension as plenty for decent wheeling.mattress_821 wrote:yeah mmaaxx i get what your saying. what would you recomend for a lift been capable as well as legal. around 4? 2 spring 2 body?
after that, trim guards, get a high clearance bumper/bar and either cut the rear quarter panels for more clearance or fit a tray.
if need be, move the front diff abit forward for more tyre clearance...many ways to skin a cat.
get lockers for more traction.....you centre of gravity will be decent.
sometimes its the driver and picking the right line not always the biggest vehicle.
Ive upstaged quite a few bigger rigs, only with my 33's and front locker, plus a couple of other mods to gain more approach and departure angle.
Boofs spot on, Huge trucks bring unwanted attention, and usually its the drivers behaviour in these vehicles that labels the rest of us as Hoons.
[url]http://www.monsterrides.com.au[/url]
Trust me, I doubt a 6" lift is going to be capable offroad, if you are still going to go for it, get a decent rollbar, as you ill probably use it a bit.mattress_821 wrote:i want something that looks tough as well as capable off road. im not one of those f%^&wits that drive around town that hav never taken there 4X4 off road. i was told by manell motors down near newcastle that lift would be fine just not the tyres. they have an engineer that does there work and he said it could be engineered with smaller tyres.im only passing on what ive been told
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
mate i got a hilux with just 2'' lift n 33's n they only rub at full flex.
but like every1 else said that u dont need 6'' lift.
i mean hiluxs roll easily when u go ova 3'' n u want to keep a low centre of gravity aswell. i would go wat weiner has dun n mayb just a 300mm b.l
but thats just me
but like every1 else said that u dont need 6'' lift.
i mean hiluxs roll easily when u go ova 3'' n u want to keep a low centre of gravity aswell. i would go wat weiner has dun n mayb just a 300mm b.l
but thats just me
1991 2.8 turbo,ruf,patrol rear springs,inverted 14'' bilsteins,33's,rear locker,winch,sliders plus more...
TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
I agree. Go two inch lift, guard chop as required, and go 33s (or bigger if you want to deal with the driveline issues,but I wouldn't).Weiner wrote:Trust me, I doubt a 6" lift is going to be capable offroad, if you are still going to go for it, get a decent rollbar, as you ill probably use it a bit.
You will outdrive the luxes that are lifted higher although the cruisers and patrols are another story.
This is not legal advice.
i just chucked a body lift in my truck, which gives me a 2+2" lift (OME springs) and im running 285/75R16 MTZ's
Absolutely no scrubbing at all- i had to wind the drivers rear steering stop out 1/4 of a turn to stop a tyre rubbing on a spring (its only that side?) but nothing else comes close to touching!
Absolutely no scrubbing at all- i had to wind the drivers rear steering stop out 1/4 of a turn to stop a tyre rubbing on a spring (its only that side?) but nothing else comes close to touching!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
oh- and with a 2" lift, i killed a Hardy Spicer centre bearing in 10,000kms!ferrit wrote:i just chucked a body lift in my truck, which gives me a 2+2" lift (OME springs) and im running 285/75R16 MTZ's
Absolutely no scrubbing at all- i had to wind the drivers rear steering stop out 1/4 of a turn to stop a tyre rubbing on a spring (its only that side?) but nothing else comes close to touching!
Found that the shaft from a 2000 3.0D hilux single cab (which is a one piece) is a direct drop in! 2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
i wanted to go big for clearance as alot of the flood waters i hav to cross etc. cum up pretty high. the hilux i drove with the 8 inch was all about wank factor as he replaced the live front axle with an independent to stiffen it up on road. if i was to go 2'' body and 2''spring how much mould i be lookin at? and just put 33's on it.
ferrit wrote:oh- and with a 2" lift, i killed a Hardy Spicer centre bearing in 10,000kms!ferrit wrote:i just chucked a body lift in my truck, which gives me a 2+2" lift (OME springs) and im running 285/75R16 MTZ's
Absolutely no scrubbing at all- i had to wind the drivers rear steering stop out 1/4 of a turn to stop a tyre rubbing on a spring (its only that side?) but nothing else comes close to touching!
2000 3.0D hilux single cab you say, direct drop in you say I know what i'm doing this weekend[b]Cheers Big Al[/b]
Probably get the body blocks for $100-$150 and the price of springs.mattress_821 wrote:i wanted to go big for clearance as alot of the flood waters i hav to cross etc. cum up pretty high. the hilux i drove with the 8 inch was all about wank factor as he replaced the live front axle with an independent to stiffen it up on road. if i was to go 2'' body and 2''spring how much mould i be lookin at? and just put 33's on it.
Or push the diff forward as well and whack some 35's on.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
I'm building a 85 4Runner at the moment and have done heaps of research, it's all over the web (same chassis and running gear as yours).
To get you started:
http://www.pirate4x4.com/forum/forumdis ... f23d3&f=12
http://board.marlincrawler.com/index.php?board=37.0
http://www.4crawler.com/4Runner.shtml
I've fitted 2" springs and 33" MTZs, I'm going to Bob the rear for a better departure angle and fit a high clearance gearbox cross member and lift the fuel tank, I've fitted 4.8 diff gears and have some 4.7 gears to go in the transfer case, I've just acquired the calipers and disks off a later IFS to upgrade the brakes.
This should give me a pretty capable stable truck that shouldn't attract to much attention from the law. In NSW extended shackles and lift blocks under the springs are illegal, talk to an engineer in your state, I'll have to have the 33"s and rear Bob engineered.
The trend in the states at the moment appears to be building their trucks low for stability.
Using 33" tyres saves $$$ on not fitting upgraded axles, cv's etc.
Do your research, learn from other peoples mistakes, save your self some $$$ and heart ache.
My 2c worth, good luck with your build.
To get you started:
http://www.pirate4x4.com/forum/forumdis ... f23d3&f=12
http://board.marlincrawler.com/index.php?board=37.0
http://www.4crawler.com/4Runner.shtml
I've fitted 2" springs and 33" MTZs, I'm going to Bob the rear for a better departure angle and fit a high clearance gearbox cross member and lift the fuel tank, I've fitted 4.8 diff gears and have some 4.7 gears to go in the transfer case, I've just acquired the calipers and disks off a later IFS to upgrade the brakes.
This should give me a pretty capable stable truck that shouldn't attract to much attention from the law. In NSW extended shackles and lift blocks under the springs are illegal, talk to an engineer in your state, I'll have to have the 33"s and rear Bob engineered.
The trend in the states at the moment appears to be building their trucks low for stability.
Using 33" tyres saves $$$ on not fitting upgraded axles, cv's etc.
Do your research, learn from other peoples mistakes, save your self some $$$ and heart ache.
My 2c worth, good luck with your build.
Who is online
Users browsing this forum: Bing [Bot] and 27 guests