Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need help. What turbo is this

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Need help. What turbo is this

Post by bugshifter »

Will this Turbo fit a 5l hilux

Image
Your sister is hot but your mum does that thing with her tongue. :)
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Looks like terrano turbo but not sure.

They use a hitachi turbo

IHI-1A
IHI-1B

The turbo itself doesn't look quite the same but the Hitachi's use the triangle flange on the 2 most low end turbos, above those they use a square flange.


Could also be an airwerxs turbo again same deal lowest 2 turbos, S1B and S1BG have the triangle flange.

But the range for the AirWerx turbos is the same as the IHI turbos so I don't know if there's any differences in them.
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

fark mate can you be ANY more vague.

what model hilux, petty or diesel

*edit* sorry saw the 5l part at the last moment. still a little more info would be good

where did you see the pic, what information came with the pic etc etc


ANY indication or help on what that turbo and outlet manifold is

if you want help put a little effort into your post
http://www.populationparty.org.au/
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

This is one case where the post is worthless WITH pics.

The turbo will have manufacturer details and model numbers, how about posting them? Ther should also be A/R on one or both housings, followed by a number.

Which model 5L do you want to fit it to, and what are your max (usable) rpms???

Looks too small (unless you have 2), but that is just guesswork without the specs.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

This is the ADD there is no other info as yet.
Looking to fit it to an LN106 with a 3ltr 5l import motor in it. And thanks for the replies .
The price on the turbo is $500

4cyl turbo to suit 3.0 litre prado/3.0 litre surf as new and only done low klms bought and not needed must sell this complete
Your sister is hot but your mum does that thing with her tongue. :)
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

Sorry for the lack of info . I guess with the wealth of knowledge on this site I guess I just thought most would know just by a quick look. The add is very vague so any help would be great. I'm still learning the differece between the front and the back of a motor. LOL
Your sister is hot but your mum does that thing with her tongue. :)
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

bugshifter wrote:Sorry for the lack of info . I guess with the wealth of knowledge on this site I guess I just thought most would know just by a quick look. The add is very vague so any help would be great. I'm still learning the differece between the front and the back of a motor. LOL
No worries mate

you will find that you will get told to A) search (which doesn't always work i admit) and B) provide as much information as you can.

if you do B then you will usually get a faster more relevant and accurate answer.
http://www.populationparty.org.au/
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

bugshifter wrote:This is the ADD there is no other info as yet.
Looking to fit it to an LN106 with a 3ltr 5l import motor in it. And thanks for the replies .
The price on the turbo is $500

4cyl turbo to suit 3.0 litre prado/3.0 litre surf as new and only done low klms bought and not needed must sell this complete
Going by this its the standard turbo to suit the 1KZ-TE engine as found in surf/prado/hilux, not the 5L. Couldnt tell you if it would bolt to your 5L but I would assume not.
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

Thanks for your help.
Your sister is hot but your mum does that thing with her tongue. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests