im looking into getting an oil temp gauge. but first i just want to see what the oil runs out and then i will decide if i want to get a gauge. so i was just looking on ebay and found a cheap oil temp gauge. what do you think just for a tempree setup?
http://cgi.ebay.com.au/52mm-Smoke-Face- ... 240%3A1318
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cheap gauges
Moderators: toaddog, TWISTY, V8Patrol, Moderators
cheap gauges
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
its only going be in for a few weeks or whatever.
my plan was to drop the sump (may be leaking on the gasket too) and silversolder a the approprient brass socket on the bottom of the sump or on the upper bit of the sump
my plan was to drop the sump (may be leaking on the gasket too) and silversolder a the approprient brass socket on the bottom of the sump or on the upper bit of the sump
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Who is online
Users browsing this forum: No registered users and 2 guests