GOT A 12,000LBS WARN WHICH CUTS OUT UNDER (I BELIEVE) SMALL LOADS. GOT 1 X 750CCA AND 1 X 550CCA LINKED FOR WINCHING THROUGH ARB SOLENOID. STANDARD ALTERNATOR PUTTING OUT CORRECT VOLTAGE (ACCORDING TO DASH VOLT METER)
WHY DOES IT CUT OUT?
NOT ENOUGH POWER? SHOULD I REPLACE 550CCA WITH ANOTHER 750CCA? OR GET HIGHER OUTPUT ALTERNATOR? IF WHAT AMPAGE SHOULD I GO?
TOO MUCH HEAT?
POTENTIAL OTHER REASON?
WHO CAN I TAKE IT TO IN BRISBANE TO CHECK IT OUT? OR HAS SOMEONE ELSE HAD SAME PROBLEM?
THANKS,
DAN
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
WARN WINCH CUTTING OUT - BRISBANE
Moderators: toaddog, TWISTY, V8Patrol, Moderators
WARN WINCH CUTTING OUT - BRISBANE
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
It shouldnt cut out, i ran mine on one 500cca battery once before i went duals.
Have you just installed it?, is the motor earthed properly (the smaller cable? and all other cables fine, could be a dodgy solenoid, take it to arb or where you bought it from.
Have you just installed it?, is the motor earthed properly (the smaller cable? and all other cables fine, could be a dodgy solenoid, take it to arb or where you bought it from.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
was fitted in late 07 but it hasn't done a lot of work at all. I've seen others pull way bigger loads all day long and they never cut out so somethings wrong. ARB fitted it so i'll get them to check it out. Hope i get someone who knows what they are doing! Thanks berad
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
My mate also has a brand new warn 12000lb low mount, and it cuts out just re-spooling the cable up a small hill, not even recovering a vehicle. He is yet to get his checked out.
I beleive these winches have a overtemp cutout switch in them. Maybe there is a bad batch out there?
I beleive these winches have a overtemp cutout switch in them. Maybe there is a bad batch out there?
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
thanks mate i'll get arb to check it for me i'll let you know if they find anything so your mate can get his done. They have a warranty so your mate could prob get his done under that. I bought mine and it sat in the shed for the warranty period while deicding which bar to put on.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Who is online
Users browsing this forum: No registered users and 4 guests