Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What's your dream Zook build?
Rusty's old zook that is getting built up atm with an LS series V8 would be pretty special but I think on 37's it's under tyred.
Mine would be turbo G13B GTi motor, LWB, NT, Bundera axles, SPUA, YJ Jeep springs, Shackle reversal, Big gaurd chop with bushwacker flares or Wrangler rears, 37" maxxis trepadors, exo cage with custom tray back, endless air with tank, 6.5 transfers and 5.12 diff gears, tube fron bar with fully worked high mount winch, flat belly pan fully plated up, power steering.
Mine would be turbo G13B GTi motor, LWB, NT, Bundera axles, SPUA, YJ Jeep springs, Shackle reversal, Big gaurd chop with bushwacker flares or Wrangler rears, 37" maxxis trepadors, exo cage with custom tray back, endless air with tank, 6.5 transfers and 5.12 diff gears, tube fron bar with fully worked high mount winch, flat belly pan fully plated up, power steering.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Mine's pretty similar to above.
NT LWB, FRP hardtop, 6.5 Tcase, 4.3 diffs, air locked front, welded rear, Bundy rear diff, lux front, 4-link rear, 3link + P/hard front, Coils, comfy seats, power steer, OBA, 33x12.5 swampers, custom barwork, internal cage.
Currently running a 4K motor with a view to changing it to a CA18Det.
NT LWB, FRP hardtop, 6.5 Tcase, 4.3 diffs, air locked front, welded rear, Bundy rear diff, lux front, 4-link rear, 3link + P/hard front, Coils, comfy seats, power steer, OBA, 33x12.5 swampers, custom barwork, internal cage.
Currently running a 4K motor with a view to changing it to a CA18Det.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
96 model LWB Vitara chopped into styleside ute
Supercharged V6 zook motor
SAS
internal cage
Custom sliders/barwork
snorkel
aircompresser (sp?)
Front & Rear airlockers
air tank
Black sunraiser (sp?) with, offroad:35X12.5R15 MAXXIS Treperdors (sp?), on road:255/75R15 mud tyres of some sort
Snorkel
Front bash plate and rear fuel tank bash plate
rock lights
good sound system
Supercharged V6 zook motor
SAS
internal cage
Custom sliders/barwork
snorkel
aircompresser (sp?)
Front & Rear airlockers
air tank
Black sunraiser (sp?) with, offroad:35X12.5R15 MAXXIS Treperdors (sp?), on road:255/75R15 mud tyres of some sort
Snorkel
Front bash plate and rear fuel tank bash plate
rock lights
good sound system
89 Vitara, 1.6lt carby, 235 Maxxis all terrains, custom 3inch rear tube bumper, no lift :)
04 K5 Suzuki V-strom 650
My motor bike makes more power than my car
04 K5 Suzuki V-strom 650
My motor bike makes more power than my car
If you used a bundy hiclown it would drive through all 8 layers of gravity in high range.Wesley wrote:but mine has a hiclone so its making 9000GRPABT1 wrote:Only in a dream does a top fuel engine make 7500hpWesley wrote:Dream?
500ci top fuel engine (about 7500hp)
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
my current plans.
1990 LWB WT
1.6 Vit engine
3sp or 4sp Vit Auto
into modified Vit Transfercase (front output shaft removed)
running either Kicker3style into stock sierra transfer, on beefed up mounts in stock possition OR divorced stocke sierra transfer, moved back slightly.
Custom trans tunnel
Shackle reversal, with bit of lift, less than i have now.
Trussed zook diffs
arb locker front and rear
Bodylift to make engine/gearbox plans easier.
FRP extracab. with internal/external rollcage.
tube bars front an rear.
with 35" tyres (possibly not even)
1990 LWB WT
1.6 Vit engine
3sp or 4sp Vit Auto
into modified Vit Transfercase (front output shaft removed)
running either Kicker3style into stock sierra transfer, on beefed up mounts in stock possition OR divorced stocke sierra transfer, moved back slightly.
Custom trans tunnel
Shackle reversal, with bit of lift, less than i have now.
Trussed zook diffs
arb locker front and rear
Bodylift to make engine/gearbox plans easier.
FRP extracab. with internal/external rollcage.
tube bars front an rear.
with 35" tyres (possibly not even)
here's my dream build as done by rough country in the USA
Vehicle: '87 Suzuki SJ-410
Engine: 5.7L Hemi
Transmission: 45RFE
Transfer case: 4.3:1 Atlas II
Front axle: Spidertrax housing, Currie 9-inch center, Detroit Locker, 4.56 gears
Rear axle: Spidertrax housing, Tru Hi-9, Detroit Locker, 4.56s
Steering: PSC full hydraulic
Suspension: Custom four-link with coilovers
Tires & Wheels: 39-inch BFG Krawlers on 17x9 American Racing
Other Stuff: Fab Fours front and rear bumpers, Ramsey 9,500-pound winch, aluminum links, rear suspension winch
Built for: Big rocks
Vehicle: '87 Suzuki SJ-410
Engine: 5.7L Hemi
Transmission: 45RFE
Transfer case: 4.3:1 Atlas II
Front axle: Spidertrax housing, Currie 9-inch center, Detroit Locker, 4.56 gears
Rear axle: Spidertrax housing, Tru Hi-9, Detroit Locker, 4.56s
Steering: PSC full hydraulic
Suspension: Custom four-link with coilovers
Tires & Wheels: 39-inch BFG Krawlers on 17x9 American Racing
Other Stuff: Fab Fours front and rear bumpers, Ramsey 9,500-pound winch, aluminum links, rear suspension winch
Built for: Big rocks
Ransom note = demand + collage
LWB Tray back,
4age, auto, 6.5 transfer...
Gq rear, Gu front diffs
4link rear, 3link (x-link) front
coilovers
42's
exo
etc etc
4age, auto, 6.5 transfer...
Gq rear, Gu front diffs
4link rear, 3link (x-link) front
coilovers
42's
exo
etc etc
[quote="jessie928"]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
Hope you dont need to use the spare!FC3892 wrote:i will get shot down for saying it, but i think once u start swapping diff's, motors, transfer.. then put half a nother car in and under it, for ME it stops being a zook. Starts being a "truck".
Anywho, back on track
that gets my vote for a cool build
Adam
My dream build would be a STOCK height lj80 with cut guards and flares to accommodate huge offset 31 inch pedes. locked diffs and a small turbo diesel with the boost wound right up =) hopefully one day ill accomplish that
although i dont mind my ute just a few more mods
http://i189.photobucket.com/albums/z108 ... 052007.jpg
although i dont mind my ute just a few more mods
http://i189.photobucket.com/albums/z108 ... 052007.jpg
www.auszookers.com
which one?badger wrote:While we are doing the grave dig. anyone have any info or know of a build thread for the white tin top?
there was one in SEQ with kwarlers and hilux diffs on a coily hard top
or
chopzook's one old white tin top with GQ diffs , exo and 44 swampers
[color=green]Vote Earth[/color]
Posts: 172
Joined: Sat Jul 10, 2004 6:47 pm
Joined: Sat Jul 10, 2004 6:47 pm
Location: sitting on the back seat of the bus licking your sisters hairy minge
Mine would be using completly stock suzuki parts
LJ20 with a LJ50 motor
LJ20 diffs using L40 6.5 diff gears :-)
Standard 600-16 bar treads
Basically unstoppable
weight 600kgs
final drive = 6.5 diffs x 3.014 low range x 3.835 first gear = 75.13 :-) :-)
Top speed of 60 kph but can be a framed behind any car
OR
LJ50 with LJ80 diffs with custom front axles to fit 1.3 CV's
H25 v6 + 4speed auto
33 inch centerpides on mega offset wheels
LJ20 with a LJ50 motor
LJ20 diffs using L40 6.5 diff gears :-)
Standard 600-16 bar treads
Basically unstoppable
weight 600kgs
final drive = 6.5 diffs x 3.014 low range x 3.835 first gear = 75.13 :-) :-)
Top speed of 60 kph but can be a framed behind any car
OR
LJ50 with LJ80 diffs with custom front axles to fit 1.3 CV's
H25 v6 + 4speed auto
33 inch centerpides on mega offset wheels
[quote="sheps"]
When was the last time you correctly spelled a motor into a car? The people that should stay away from spanners are pedantic English teachers & keyboard spelling nazi's.[/quote]
When was the last time you correctly spelled a motor into a car? The people that should stay away from spanners are pedantic English teachers & keyboard spelling nazi's.[/quote]
the one pictured on this page............... neither of the 2 you mentionedofr57 wrote:which one?badger wrote:While we are doing the grave dig. anyone have any info or know of a build thread for the white tin top?
there was one in SEQ with kwarlers and hilux diffs on a coily hard top
or
chopzook's one old white tin top with GQ diffs , exo and 44 swampers
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
Darwin/west oz/tasmania.. Currently in Darwin at the moment but heading to South east asia next month.bazooked wrote:were the hell have u been hidin?
Thinking about coming home in October to build another zook to take on a long road trip... see how i go.
Seeing as this is a dream zook build thread and i don't want to be flamed for chitchat:
31's on reversed rims
Gears 4.19 - so I can still hit a HWY without melting the engin in Hi
Custom rears up front with chassis extention (Help the weight distribution and soften the ride)
Virtual lift as done by the D-man for stumped in members section
EFI
Long range tank
Thats pretty muchh it, and I would hope it's under the $3500.
Built for sand and distance.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Where is the build up for this?grimbo wrote:here's my dream build as done by rough country in the USA
Vehicle: '87 Suzuki SJ-410
Engine: 5.7L Hemi
Transmission: 45RFE
Transfer case: 4.3:1 Atlas II
Front axle: Spidertrax housing, Currie 9-inch center, Detroit Locker, 4.56 gears
Rear axle: Spidertrax housing, Tru Hi-9, Detroit Locker, 4.56s
Steering: PSC full hydraulic
Suspension: Custom four-link with coilovers
Tires & Wheels: 39-inch BFG Krawlers on 17x9 American Racing
Other Stuff: Fab Fours front and rear bumpers, Ramsey 9,500-pound winch, aluminum links, rear suspension winch
Built for: Big rocks
Josh
This is where it's at...
http://auszookers.com/index.php
[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
http://auszookers.com/index.php
[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Who is online
Users browsing this forum: No registered users and 37 guests