Nissan Patrol 1992 GQST30 RB30 Turbo
Body Wagon
Motor RB30 Turbo
Gearbox 5 speed manual
Colour White
Body:
2 Inch Body lift ($200 plus about $500 Labour)
Arb Steel Bullbar ($1200)
Headlights IPF inserts with Phillips bulbs ($170)
Spotties Nite Stalker 170’s running 130 Bulbs ($200)
Hayman Reece Towbar (come with car)
No smashed panels no dented sills.
Motor:
RB30 High Comp 9.2 static compression.
Carbon Graphite Head Gasket. ($295)
R31 Skyline EFI Intake Manifold. ($20)
Gas Research Throttle Body, B2 converter dual lock offs etc. $3000.00)
Garret T3 Turbo Rebuilt Small High flow. ($1000)
Exhaust 3 inch mandrel bent from dump pipe back. ($960.00)
Turbo oil and water lines are Teflon inner stainless steel braided outer. ($420)
Exhaust Manifold High mount stainless steel. ($700.00)
Ice Ignition leads. ($120)
Intercooler 300x600x75 dual pass ($300)
Airbox VL/VN/VP Commodore. ($25)
Oil Catch can. ($40)
Cooler Pipes custom made, all joiners Silicone. ($300.00)
Water Injection 60 Psi pump, electric solenoid, 300cc Nozzle adjustable hobs switch etc. ($300.00)
Driveline:
Gearbox stock FS5R30A
2 inch King Springs ($300)
Pedders Foam Cell Big Bore ($700)
Diffs stock rear LSD, 4.3 Ratios.
Clutch Custom Excedy organic. ($700)
Comes with RWC 31X10.5X15 all terrains, but is setup for 35's as in pics.
Interior:
Seats Stock in good nic not tears on fabric no stains.
Door trims again good for age no real problems here but check pics.
Dash Stock ST Dash (Tacho, Speedo, oil pressure, water temp, voltage and fuel).
Pillar Mounted Gauges (Speco- Boost – Oil Pressure – Water Temp – Voltage) ($250.00)
Carpets in Front Good for age, clean some wear, rear very good.
Electronics:
Excide 4x4 battery 2 weeks old
Uniden GPS105 UHF ($480.00)
Pearce Simpson AM ($80)
Headunit AlpineCDA-9886i (USB, CD, Full Speed IPOD) ($560)
Front Speakers Sound Stream Tarantula 6.5 inch TRC.6N 200w RMS ($525.00)
Subs 2 x 12 Inch Kicker DCVR 900w RMS($600)
Amps Response 2 x 170 RMS (1x500 RMS) ($350)
Amps Kenwood 9103D Monobloc 1000 RMS at 1 and 2 Ohms. ($570.00)
4 Gauge cabling, Big terminals etc Stinger distribution blocks etc. ($160)















