Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V8 60 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 16
Joined: Tue Apr 14, 2009 8:46 pm
Location: Hervey Bay

V8 60 series

Post by big_60 »

hi guys i was woundering if anyone could steer me into the right direction. I want to put a 253,308,351 V8 into my 60 series. where do i shop or does anyone have a conversion kit for sale. and what roughly will it cost me ??? :)
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

It will generally cost twice what you budget.
Personally I would go with the 351, anything under the best part of 6 litres will not be worthwhile in such a heavy truck.

CRS are probably the best place to start for conversion gear.

Cheers
Top
Posts: 16
Joined: Tue Apr 14, 2009 8:46 pm
Location: Hervey Bay

Post by big_60 »

CRS ?????? is there a web sight for thq
Top
Posts: 194
Joined: Wed May 04, 2005 9:06 pm
Location: south coast n.s.w.

Post by croozy »

this would be my choice
http://www.marks4wd.com/
it's never a problem until it can't be fixed, even then it' only a minor set back
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

Contact steve (killalux) and have a chat. He'll have it dont in not time, drive in, drive out. 0404811498 he's on the sunshine coast
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

big_60 wrote:CRS ?????? is there a web sight for thq
Castlemaine Rod Shop :D
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

ive got a full marks kit to suit chev into 60 series pm me and ill send some pics ill get freight quote tomorow if you like bellhousing will also suit turbo pattern holden v8 ie308 or injected 5.0l(need different engine mounts) or get dowels re drilled??? and it will suit 253 also but i wouldnt reccomend the 253 in such a heavy truck this hit includes headers and y pipe for chev small block
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

hiluxmad wrote:ive got a full marks kit to suit chev into 60 series pm me and ill send some pics ill get freight quote tomorow if you like bellhousing will also suit turbo pattern holden v8 ie308 or injected 5.0l(need different engine mounts) or get dowels re drilled??? and it will suit 253 also but i wouldnt reccomend the 253 in such a heavy truck this hit includes headers and y pipe for chev small block
Here's the solution.... :cool: :cool:
Show me the money..SHOW ME THE MONEY
Top
Posts: 54
Joined: Thu Jun 26, 2008 5:08 pm
Location: Bundaberg,Qld

Post by strom80 »

I've got a marks adaptors kit for a 351 clevo to cruiser manual, have been trying to get it out of the shed for ages.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

strom80 wrote:I've got a marks adaptors kit for a 351 clevo to cruiser manual, have been trying to get it out of the shed for ages.
I thought marks were all GMH or GM?

Their bellhousings are good gear too.
Top
Posts: 54
Joined: Thu Jun 26, 2008 5:08 pm
Location: Bundaberg,Qld

Post by strom80 »

Struth wrote:
strom80 wrote:I've got a marks adaptors kit for a 351 clevo to cruiser manual, have been trying to get it out of the shed for ages.
I thought marks were all GMH or GM?

Their bellhousings are good gear too.

I brought it about 4 years ago (give or take) So don't know if they still do. Only thing missing is the instructions. Shouldn't be to hard to get them.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

strom80 wrote:
Struth wrote:
strom80 wrote:I've got a marks adaptors kit for a 351 clevo to cruiser manual, have been trying to get it out of the shed for ages.
I thought marks were all GMH or GM?

Their bellhousings are good gear too.

I brought it about 4 years ago (give or take) So don't know if they still do. Only thing missing is the instructions. Shouldn't be to hard to get them.
Any idea which cruiser manual it is for, as in model #

Cheers
Top
Posts: 54
Joined: Thu Jun 26, 2008 5:08 pm
Location: Bundaberg,Qld

Post by strom80 »

It's out of a 1982 with a 4spd box. I have the cruiser bellhousing as well. As I have gone to an auto. hope that is what you were after. there is a number on the cruiser housing I will have a look and get back to you
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests