Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i have low beam and i have flash high beam but i do not have perminant high beam. When i check the pallarity of the connection @ low beam i have power at the left source and a earth of the right side, when i use the flasher i have power from the top source and a earth at the right side, when i use high beam i have poser from both the left and the top and a earth from the bottam.
I had a similar problem in my 60 with an aftermarket headlight relay. Finally tracked it down to a bad connection in the right high beam, resulting in the high indicator in the dash not working, which stuffed everything! Go figure. Toyota do some funny things with their switches.
Solved the problem with a black box from Pirahna, which plugged into the original right hand headlight wiring.
