Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2F extractors

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 102
Joined: Sun Jun 01, 2008 5:40 pm
Location: Melbourne

2F extractors

Post by danny40 »

quick question for a mate will 2F extractors fit on a 3F

cheers
Top
Posts: 6
Joined: Thu May 07, 2009 2:53 pm
Location: Tasmania

Post by Tazz4wd »

To put it simply. No. I brought a set off Ebay went to get them fitted to my 3F, slightly wrong stud pattern.
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

3f has 2 extra bolts as im using a 3fe header plate on my 2f

a simple quick diegrind should see a set of 2f extractors fit a 3f
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

They will be to long, 3F block is much shorter never mind the stud patterns.

So the answer is NO. Cutting and welding would be needed.

Extractors on a 2F sit low as it is, I had my original ones shortened so not to damage them of road, it would be even worse on a 3F using 2F extractors.

I don't have a problem any more as I have a 2F-ETI :D
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest