Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

electronic dizzy to a 3.5 carby help

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

electronic dizzy to a 3.5 carby help

Post by defmec »

i have just installed a dizzy from a 97 disco into my 85 county and it wont start i have changed the gear over for the oil pump put the coil in and wired up the module below the coil the only problem is where do the pick up wires from the dizzy go to the in put wires that go into the module are red blue and there is a earth that goes from the socket to the mounting bracket
This is a block of text that can be added to posts you make
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

DEFMAC if it helps i will be at a mates place tomorrow and in his county we put an 97 disco motor. If you PM me your number then when i am there i could give you a call and trace each wire and see what and where they connect. :idea:
Cheers Jamie
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests