Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What Landcruser or Nissan Diffs will fit in a '86' lux?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
What Landcruser or Nissan Diffs will fit in a '86' lux?
just considering putting stronger diffs under my 4wd, not sure what ones i could use. if anyone has done this a ruff estimate would be good ...
thanks
thanks
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
60 series up front(dead easy)more or less straight bolt up
can put 60 series in the rear but with offset diff makes it tricky...
prob use a gq rear as diff is centered and get rear discs at the same time
could also coil the rear while your in there as the coil hats are already on there..... just a thought.
i ve got 60 series front and rear in my lux as that is what i had laying around
can put 60 series in the rear but with offset diff makes it tricky...
prob use a gq rear as diff is centered and get rear discs at the same time
could also coil the rear while your in there as the coil hats are already on there..... just a thought.
i ve got 60 series front and rear in my lux as that is what i had laying around
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
what size tyres and diff gears do you run?collins110 wrote:i mainly want to do it so i stop breaking CV joints and if i can get coils at the same time it would be a bonus
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
im running 31's with stock standard diff gears with front and rear lockersjoeblow wrote:what size tyres and diff gears do you run?collins110 wrote:i mainly want to do it so i stop breaking CV joints and if i can get coils at the same time it would be a bonus
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
i ran 33" simex with front and rear lockers with my foot flat to the floor against rocks, lifting wheels etc and never broke anything with stock lux diffs.collins110 wrote:im running 31's with stock standard diff gears with front and rear lockersjoeblow wrote:what size tyres and diff gears do you run?collins110 wrote:i mainly want to do it so i stop breaking CV joints and if i can get coils at the same time it would be a bonus
i reckon you will be right if u drive sensible
www.mudrhino.com.au
Why would you want something stronger then?collins110 wrote:im running 31's with stock standard diff gears with front and rear lockersjoeblow wrote:what size tyres and diff gears do you run?collins110 wrote:i mainly want to do it so i stop breaking CV joints and if i can get coils at the same time it would be a bonus
If wanted just get longfields and be done with it.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
You should be able to get this to hold together pretty well with stock GENUINE stuff. The aftermarket Chinese stuff maybe not.collins110 wrote:im running 31's with stock standard diff gears with front and rear lockers
I think you're contradicting yourself there dude.bushtuckerned wrote:i ran 33" simex with front and rear lockers with my foot flat to the floor against rocks, lifting wheels etc and never broke anything with stock lux diffs.
i reckon you will be right if u drive sensible
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
haha yeh i know. but i was trying to say. if they can put up with that. they should put up with with most things. and you could possibly drive more sensiable than mesierrajim wrote:
I think you're contradicting yourself there dude.bushtuckerned wrote:i ran 33" simex with front and rear lockers with my foot flat to the floor against rocks, lifting wheels etc and never broke anything with stock lux diffs.
i reckon you will be right if u drive sensible

www.mudrhino.com.au
Who is online
Users browsing this forum: No registered users and 4 guests