Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tries fixing my 80 series brake booster....
Moderators: toaddog, Elmo, DUDELUX
Tries fixing my 80 series brake booster....
Well as i had a post up not that long ago about in the search for a brake booster i was feeling around the gasket between the booster and master to find the leak was coming from under there. Went and bought some gasket paper and goo pulled them apart to find the air that was coming out was actually coming out from a small groove at the bottom of the master cylinder. Just wondering what this groove is and why would air pressure be coming out of it......
THe booster is a large diaphragm. It needs to let the air out the gap when the pedal is applied, the diaphragm moves forward and if the air can not get displaced it wont work or be pushed into the master cylinder. it should only be blowing air when the pedal is depressed if its leaking all the time then you may have a leaking diaphragm.
Who is online
Users browsing this forum: No registered users and 3 guests