Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
injecting 79 2 litre lux
Moderators: toaddog, Elmo, DUDELUX
injecting 79 2 litre lux
i have a 79 2litre lux and want some injection without mass dollars, is there a head that will bolt straight on the block or a full motor that will bolt to the bellhousing of a 4 speed
they are the twin cam version of what is already in there and yes they are from the celica but most were twin carb models but there are a few efi models around you will just have to search for them or you could just get efi off a camira amd modify the intake to suit the 18 r and run the delco computer that came from the camira (it just needs to be remapped to suit the bigger motor ,,,someone please correct me if i am wrong)
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
so get a cheap camira, and rip all the loom and stuff out, i used to have one and it was the 2 litre injected camira, will the 2 litre one go straight on or still have to be mapped, also much work in wiring it up or just hook it to pulse on coil and that feeds the computer, would i need a crank angle sensor, 02 sensor etc etcflyinwall wrote:they are the twin cam version of what is already in there and yes they are from the celica but most were twin carb models but there are a few efi models around you will just have to search for them or you could just get efi off a camira amd modify the intake to suit the 18 r and run the delco computer that came from the camira (it just needs to be remapped to suit the bigger motor ,,,someone please correct me if i am wrong)
sorry to pick your brain so hard
Who is online
Users browsing this forum: No registered users and 44 guests