Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Welding panels

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 82
Joined: Tue Feb 17, 2009 10:53 am
Location: Rockhampton

Welding panels

Post by norty40 »

In Queensland, is there any rules or laws in place saying wat kind of welder you can use on panels? I'm handy with the stig or mig its just that the I already have a stick and don't want to get a mig welder if I can use a stick welder.
Top
Posts: 5
Joined: Sat Mar 21, 2009 5:05 pm
Location: morayfield

Post by ryan.u »

Mate, I'm pretty certain it doesn't matter what welder you use, However, be aware that stick welders weld fairly hot and you run the risk of warpage or burn through. Stick welders aren't really designed for sheet steel such as car pannels and you would definately get better results and a straighter pannel out of a mig.

Ryan
Top
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

You would have to be a great welder to weld panels with an arc welder. MIG is the way to go, the lower the amps the better 30 +/-

You could try it with a stick welder, but I doubt it will be very sucsessful.
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Top
Posts: 94
Joined: Tue Jun 21, 2005 2:37 pm
Location: lismore

Post by sheriff »

yeah mig are the way to go oxy isnt to bad either if can weld with it
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Panels are not really structural but the rule of thumb is that the structural integrity of any "panel" repaired must not be compromised when doing repairs.

Usually there is no stipulation of how or what is used to repair a pane as long as the strength is retained.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

sheriff wrote:yeah mig are the way to go oxy isnt to bad either if can weld with it
I love the control you have with oxy wleding, so underrated I think.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

myself iv mig welded my old jackaroo and tig welded a toyota camry both as easy as each other but migs quicker
1995 land rover disco on 265 muddies
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest