Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15" rims on 80 series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 50
Joined: Wed Aug 20, 2008 9:31 pm
Location: sydney

15" rims on 80 series?

Post by TUFFAS »

hey just asking if 15" rims will fit on a 96 gxl 80 series?

cheers brad,
Top
Posts: 50
Joined: Sat Dec 20, 2008 8:29 pm
Location: Nowra, nsw

Post by Toyo80 »

No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.

Any reason for wanting to fit 15's?
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

if you got big offset rims, they will fit the front with no mods, but on the back you will have to grind the calipers just a little.
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 175
Joined: Mon Apr 28, 2008 9:10 pm
Location: imbil

Post by 60_series_united »

Toyo80 wrote:No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.

Any reason for wanting to fit 15's?
i have 15"s on my 92 they fit fine. what has changed in the later models?
seirra, ute chop, air locked 60 series diffs, 4-link rear, 3 link front, 35's,18" fox air shoxs, h.i.d's, 6hp high mount,
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

60_series_united wrote:
Toyo80 wrote:No they will not, unless of course you are handy with a grinder. The earlier Fj80's etc 1990-92 will fit 15's no problem.

Any reason for wanting to fit 15's?
i have 15"s on my 92 they fit fine. what has changed in the later models?
post 93 have bigger rotors, etc
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 33
Joined: Tue Apr 14, 2009 10:15 pm
Location: ALBURY WODONGA

Post by mada1234 »

You can use/fit the brakes from the earlier 80's, only a bolt on job. then you will be able to run 15'' rims on the rear.
I hit this problem when i tried to use my rims from my old 80 series, they scraped on the rear calipers.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

mada1234 wrote:You can use/fit the brakes from the earlier 80's, only a bolt on job. then you will be able to run 15'' rims on the rear.
I hit this problem when i tried to use my rims from my old 80 series, they scraped on the rear calipers.
I dont know why you would want to put on smaller brakes :roll:
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

I know guys that have ground a small amount off their calipers to fit 15" rims on their 80s'. I'm unsure of the year models though.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

So far the only safe and legal option here is fitting the early model rear calipers and back plates.

Grinding calipers is a big no no, consider what you are fiddling with!
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

late 92 had the 1fz motor update this is where the brakes changed over and 16 inch rims
xxxx wrote:
:bad-words: :snipersmile:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 119 guests