Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo installer in Melbourne??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 38
Joined: Sun Oct 28, 2007 7:40 pm
Location: Melbourne

turbo installer in Melbourne??

Post by sava75 »

Hello all,
Can anyone reccommend a TURBO installer for my
Landcruiser BJ73 3B diesel

Thanks in advance
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Where abouts exactly?

"Melbourne" is a very broad description.
Top
Posts: 38
Joined: Sun Oct 28, 2007 7:40 pm
Location: Melbourne

Post by sava75 »

Melbourne

east west north i dont really care
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Turbo Engineering Thomastown
http://turboengineering.rtrk.com.au/?sc ... 1260:22311

Diesel-Tec Lilydale
http://www.diesel-tec.com.au/ (website is offline)
Call (03) 9739 5031
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

coxy321 wrote:Diesel-Tec Lilydale
http://www.diesel-tec.com.au/ (website is offline)
Call (03) 9739 5031
x eleventy!
and workin on th site thing.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

bogged wrote:
coxy321 wrote:Diesel-Tec Lilydale
http://www.diesel-tec.com.au/ (website is offline)
Call (03) 9739 5031
x eleventy!
and workin on th site thing.
Off topic, but thats been down for a while. Is it getting rebuilt or what?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

coxy321 wrote:Off topic, but thats been down for a while. Is it getting rebuilt or what?
yea, host is shit.. waitin for passwords from Andy to re-direct it :)
Top
Posts: 38
Joined: Sun Oct 28, 2007 7:40 pm
Location: Melbourne

Post by sava75 »

thanks guys
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

JPC are great, handled all my work/car (may be worth a call) in thomas town
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 38
Joined: Sun Oct 28, 2007 7:40 pm
Location: Melbourne

Post by sava75 »

roger that,

thanks Reddo
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Axt turbos are great
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

Post by GUte »

Joel @ PGS 4WD, Mornington.
Posts on this forum.

Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

Post by KYSI »

GUte wrote:Joel @ PGS 4WD, Mornington.
Posts on this forum.

Al.
x2
Top
Posts: 238
Joined: Fri Aug 24, 2007 8:57 pm
Location: Frankston Melbourne

Post by steveoo »

KYSI wrote:
GUte wrote:Joel @ PGS 4WD, Mornington.
Posts on this forum.

Al.


x3
Top
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Post by Sammyboy »

I've used Turbo Engineering in Thomastown a couple of years back (not for a new turbo, but for a fuel pump upgrade, turbo boost increase and a dyno tune) and didn't have any issues with him (Ray). I will be hopefully taking my car back there later in the year.
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

steveoo wrote:
KYSI wrote:
GUte wrote:Joel @ PGS 4WD, Mornington.
Posts on this forum.

Al.


x3
Joel is getting a very good name for himself on this forum, he does very good work!!
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 38
Joined: Sun Oct 28, 2007 7:40 pm
Location: Melbourne

Post by sava75 »

I will check out the 2 in thomastown first.

thanks for the replies
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Reddo wrote:JPC are great, handled all my work/car (may be worth a call) in thomas town
I have had several cars tuned here and very happy with the out comes.

Fantastic knowledge of what's required for different applications.
Top
Posts: 142
Joined: Mon Sep 17, 2007 8:33 pm
Location: Macedon

Post by TURBOMQ »

sootygu wrote:
Reddo wrote:JPC are great, handled all my work/car (may be worth a call) in thomas town
I have had several cars tuned here and very happy with the out comes.

Fantastic knowledge of what's required for different applications.
X2 about jpc
mq patrol, zorst, spotties, lft ect
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest