Can anyone help with a template or info on how to get one. Its a Safari snorkel to suit
My local ARB store was not interested in helping.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux LN106 2.8d Snorkel template required
Moderators: toaddog, Elmo, DUDELUX
Hilux LN106 2.8d Snorkel template required
Your sister is hot but your mum does that thing with her tongue. :)
snorkel
Hey mate,
Had the same problem, and eventually when TJM tracked one down for me it was for the right motor and model but different mounting points (fitted up against the lower part of the guard and not the arial). So i went home and fitted it myself in about an hour, and it worked perfectly.
I used thin cardboard to trace the rough shape of the snorkel and used the groove that fits around the arial as a reference point. I kept double checking and reshaping the cardboard until it fitted perfectly. I taped on the fender, drilled the holes. removed the fender, finished the holes and cleaned em up, and then bolted the snorkel on
If u like i can give u hand, got the tools and right size hole saw. Im in bris too. PM if u want.
Cheers
Had the same problem, and eventually when TJM tracked one down for me it was for the right motor and model but different mounting points (fitted up against the lower part of the guard and not the arial). So i went home and fitted it myself in about an hour, and it worked perfectly.
I used thin cardboard to trace the rough shape of the snorkel and used the groove that fits around the arial as a reference point. I kept double checking and reshaping the cardboard until it fitted perfectly. I taped on the fender, drilled the holes. removed the fender, finished the holes and cleaned em up, and then bolted the snorkel on
If u like i can give u hand, got the tools and right size hole saw. Im in bris too. PM if u want.
Cheers
Who is online
Users browsing this forum: No registered users and 0 guests