Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
B-I-G thanx to SAM and to a lesser extent his puny homosexual sidekick, Sean hehehe
B-I-G thanx also to M&M
Can't wait to get it off road and to find out, not if it works but just how good it does work
Greg: Anything higher than standard height is too tall for you hehehe
I'm really happy with the height and the flex. I'll check it with some softer springs at a later date but I think how it is now is perfect in regards to flex/stability/balance
What kinda coils are you using? I think somewhere Sam said they are 200lb/ft? I have a set of new Kings 65 ID, 14" free height, 175lb/ft coils. I am after a set of 200s for my zook, if yours are same free height & dia mebbe we can do a swap
Yes our springs are the same dimensions as yours. I have two spare if you want to give them a try. I did have four until Mick pinched 2 today for the rear of his ZOOK.
Greg yes that is everything except tyres later he will change the front shocks.
SAM
o k hows it going ?? is it avalable yet ?? where from ?? and how much will it cost ???
what mods do you need to make to do the coils ???
is it front and rears ??? bett
b wilson wrote:o k hows it going ?? is it avalable yet ?? where from ?? and how much will it cost ??? what mods do you need to make to do the coils ??? is it front and rears ??? bett
Kit is finished now just has to be tested and then it will become available.
Looking at getting all the parts laser cut to keeop cost down so when I have price from them i can work out the price of the kit.
SAM
bazooked wrote:looks good guys wats it like onroad?
Drove it about 80km this weekend. Was all over the place initially but found out it was toeing out a fair bit so gave it some toe in and it is MUCH better. Still need to move the panhard rod mount higher but overall it drives really well. It has a bit of body roll (about the same as a SPOA)
I think anyone running this kit would be wise to run adjustable shocks all round (I only have them in the rear)
mj wrote:Any word on pricing yet? Wouldn't mind a coil front end
MJ ..Thats some nice flex on the wheelbarrow .. how does it go in rocks .. ??
I to would be keen to know what sort of $$$ the coil front is ... and what the possability is of getting an engineers cert on it ...
(At least with my SPOA i can swap back to SPUA in a few hours to get a canary off it)
Last edited by Guy on Wed Feb 04, 2004 9:30 am, edited 1 time in total.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Dropped the rear ride height 60mm tonight and it made the world of difference. Car is heaps more stable on the road. Also dropped the suspension into the centre of the shocks travel so wheel travel has improved.
uphiir wrote:Dropped the rear ride height 60mm tonight and it made the world of difference. Car is heaps more stable on the road. Also dropped the suspension into the centre of the shocks travel so wheel travel has improved.
GF should be able to get in it easier too hehehe
Will be dropping the front ride height tomorrow
Did you use different coils .. or reset the ones you had ???
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Dropped the front an inch and a half and the difference is night and day. Drives a billion times better. Development of the kit is nearing completion. Mine now has over 1000Kms and no problems. Gonna change the top front mount and that should be it
After swapping chassis with Chuck I have been able to do some good R&D with the kit.
We have them beeing laser cut at the moment.
Should be in about three weeks they will be available.
SAM
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
