Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tie rods on 60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Sat Apr 25, 2009 11:50 pm
Location: ellenbrook & karratha

tie rods on 60

Post by mat wilson »

hey guys i just replaced the tie rod ends on my 60 its got a 2" lift and 33 coopers i just noticed that the tie rod end has rubbed on one of the balance weights on the rim. it just seems that the tie rod is a bit close to the rim what can be done

cheers Mat
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

sounds like youve got the wrong rims.

Wrong backspacing.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 13
Joined: Sat Apr 25, 2009 11:50 pm
Location: ellenbrook & karratha

Post by mat wilson »

yeah i bought this a couple of months ago fr a project is there spacers available or just get new rims
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

you can get spacers. Probably the same price as new rims though, if they are just 15" sunraysias (spelling?)
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 54
Joined: Thu Jun 26, 2008 5:08 pm
Location: Bundaberg,Qld

Post by strom80 »

Had the same problem, you can get 6mm spacers and the prob is fixed. Not sure of price, now where near the price of rims, it was years ago now. Got them from your local tire pro.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

strom80 wrote:Had the same problem, you can get 6mm spacers and the prob is fixed. Not sure of price, now where near the price of rims, it was years ago now. Got them from your local tire pro.
your right, 6mm would be quite cheap as they dont need to take new studs etc like the 1-2" ones do.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Have you got the correct rim offsets? I had the same issue with my cruiser offset 16'' rims, I fitted hilux IFS hubs and eliminate problems, spacers really arent the best idea
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

f

Post by Wozza244 »

Im not 100% certain but i think you might have patrol offset rims bud.
Get out there!!
Top
Posts: 13
Joined: Sat Apr 25, 2009 11:50 pm
Location: ellenbrook & karratha

Post by mat wilson »

not sure what offset they are when i get back to perth i will go to a tyre place and find out and see what can be done
thanks guys
Top
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

Contact:
Contact lukes4x4

.

Post by lukes4x4 »

MAT WILSON we sell 6mm wheel spacers from our shop. go to www.lukeys4x4.com and they are on there. we can post as well. cheers

LUKEYS 4X4 CUSTOMS - 0409 991742
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests