Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spare tyre
spare tyre
Any idea how to mount a 32" tyre on the rear of a Sierra? What mods need to take place?
Spare tyre carrier
Hi Jacka,
Even if you could fit it on the standard tyre carrier, something that heavy can tear your tailgate to shreds. It happened to a mate of mine with a tyre less than the size of a 31in when he took a few sudden drops while offroading.
Your best bet is a heavy rear bar with a swing-away tyre carrier, so the weight of the tyre is on the swing-away mechanism, not on the tailgate. The tailgate tyre carrier is removed totally.
I have one in the for sale section, which I'll try and shoot a pic or two of for you today to give you an idea what you're after.
Even if you could fit it on the standard tyre carrier, something that heavy can tear your tailgate to shreds. It happened to a mate of mine with a tyre less than the size of a 31in when he took a few sudden drops while offroading.
Your best bet is a heavy rear bar with a swing-away tyre carrier, so the weight of the tyre is on the swing-away mechanism, not on the tailgate. The tailgate tyre carrier is removed totally.
I have one in the for sale section, which I'll try and shoot a pic or two of for you today to give you an idea what you're after.
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Are you in a hard top or soft top ??
I ran around with a 32 inch Bfg on a 15x8 for about 3 or 4 years with some heavy off pavemet driving (Not offroading .. that's naughty
)
The 15x8 was a 3.5 inch offset (4.5 inches outside the centreline of the rim) It would rub a bit on the rear bar .. other than that .. no mods to speak of .. (this was on a hard top)
I ran around with a 32 inch Bfg on a 15x8 for about 3 or 4 years with some heavy off pavemet driving (Not offroading .. that's naughty
)
The 15x8 was a 3.5 inch offset (4.5 inches outside the centreline of the rim) It would rub a bit on the rear bar .. other than that .. no mods to speak of .. (this was on a hard top)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
spare tyre
Running a Goodyear MTR on a F100 rim on a soft top but with a fibreglass roof.
Re: spare tyre
jacka wrote:Running a Goodyear MTR on a F100 rim on a soft top but with a fibreglass roof.
I would go for a chassis\bumper mounted tyre carrier in that case .. the hinges on the tailgate are not all that great and both are below the centreline of the tyre (are also smaller than the hinges on a hardtop)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Could you mount it to the interior floor in the back of the car? There are some shots somewhere of NAM's sierra with a 34" Jungle Trekker sitting in the back of it - so it must be possible to fit a 32 in there... 
I guess it will just depend on what else you have stored in the back there.
Note: doing this would also be good for weight distribution as you would have the tyre lower, and closer to being infront of the rear axel
I guess it will just depend on what else you have stored in the back there.
Note: doing this would also be good for weight distribution as you would have the tyre lower, and closer to being infront of the rear axel
DMA Founding Member #1 - Now Retired
Pics as promised
Hi again Jacka,
Here's those pics as promised.
The swing-away part is secured to the rear bar by a simple wingbolt arrangement, then the carrier can swing away. After that, you're able to use the tailgate like normal.
As you can see, and in terms of your PM question, the Hayman Reese towbar is integral to the whole thing, and the spare tyre carrier is very heavy capacity, and is completely independent of the tailgate (which is made of aluminium cans in comparison).
Here's those pics as promised.
The swing-away part is secured to the rear bar by a simple wingbolt arrangement, then the carrier can swing away. After that, you're able to use the tailgate like normal.
As you can see, and in terms of your PM question, the Hayman Reese towbar is integral to the whole thing, and the spare tyre carrier is very heavy capacity, and is completely independent of the tailgate (which is made of aluminium cans in comparison).
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
also if you have fab skills you could make a rack that goes horizontally across the tub area. the spare can be mounted on there. you still retain floor space for equipment and should should still have decent rear vision.
alternatively, you could make something like the attached pic. this is designed to sit behind the drivers seat on the inside of the vehicle. the bracket would mount to the top edge of the tub and to the floor. the floor mount could probably use the existing hole for the rear seat. the spare would mount standing up behind the drivers seat to the 3 bolts. drivers vision is not impeded and floor space is still plentiful.
alternatively, you could make something like the attached pic. this is designed to sit behind the drivers seat on the inside of the vehicle. the bracket would mount to the top edge of the tub and to the floor. the floor mount could probably use the existing hole for the rear seat. the spare would mount standing up behind the drivers seat to the 3 bolts. drivers vision is not impeded and floor space is still plentiful.
Towbar
Dunno who made it, but it's super convenient, and all works really well.
It's bolted rather securely to the chassis, and welded together really well, so I couldn't see it being illegal. The only thing that *may* be arguable, is the ends not having the rubber caps on it still, but that's just a matter of screwing either N/T or W/T ends on it, depending on which of the two you drive.
I'm wrecking the whole car out anyway (as I couldn't be bothered installing a high steer setup on it to counteract the bump steer), so it doesn't matter to me. At the moment, it's lifted about 9 inches (in total), plus whatever the 33's give you on top of that and still registered (but not engineered...eeeek!)
Lemme know if you wanna have a look at it to get ideas. I'll be in Melbourne for a few days as of tomorrow morning, but I'll try and visit here from internet cafe's while I'm down there.
It's bolted rather securely to the chassis, and welded together really well, so I couldn't see it being illegal. The only thing that *may* be arguable, is the ends not having the rubber caps on it still, but that's just a matter of screwing either N/T or W/T ends on it, depending on which of the two you drive.
I'm wrecking the whole car out anyway (as I couldn't be bothered installing a high steer setup on it to counteract the bump steer), so it doesn't matter to me. At the moment, it's lifted about 9 inches (in total), plus whatever the 33's give you on top of that and still registered (but not engineered...eeeek!)
Lemme know if you wanna have a look at it to get ideas. I'll be in Melbourne for a few days as of tomorrow morning, but I'll try and visit here from internet cafe's while I'm down there.
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
greg wrote:Could you mount it to the interior floor in the back of the car? There are some shots somewhere of NAM's sierra with a 34" Jungle Trekker sitting in the back of it - so it must be possible to fit a 32 in there...
I guess it will just depend on what else you have stored in the back there.
Note: doing this would also be good for weight distribution as you would have the tyre lower, and closer to being infront of the rear axel
We Managed to get 4 MTR's in a very similar sounding zook last night
yeshemesh
I made it.
It is legal as far as I know, can't see why it wouldn't be.
P.S.
The bushes on the swing arm are made from semi-trailer anchor pin bushes. so if they wear out, just get some from a truck spares shop.
Oh yeah, as someone mentioned earlier in the post about the weight on the standard carrier, I broke the back door in half when I had a 33 mounted on it - hence the rear tyre carrier being so heavy duty.
It is legal as far as I know, can't see why it wouldn't be.
P.S.
The bushes on the swing arm are made from semi-trailer anchor pin bushes. so if they wear out, just get some from a truck spares shop.
Oh yeah, as someone mentioned earlier in the post about the weight on the standard carrier, I broke the back door in half when I had a 33 mounted on it - hence the rear tyre carrier being so heavy duty.
No Idea wrote:I made it.
It is legal as far as I know, can't see why it wouldn't be.
P.S.
The bushes on the swing arm are made from semi-trailer anchor pin bushes. so if they wear out, just get some from a truck spares shop.
Oh yeah, as someone mentioned earlier in the post about the weight on the standard carrier, I broke the back door in half when I had a 33 mounted on it - hence the rear tyre carrier being so heavy duty.
The more generously proportioned carry their spare in the front. I'm pretty sure its legal.
yeshemesh
Who is online
Users browsing this forum: No registered users and 2 guests