Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
WHITE SMOKE FROM THE EXHAUST WHEN THE ENGINE IS COLD???
WHITE SMOKE FROM THE EXHAUST WHEN THE ENGINE IS COLD???
What causes white smoke from the exhaust when the engine is cold? The smoke smells like petrol, the spark plugs were fouled and not firing very well so I replaced all the plugs, this doesn't seem to have fixed it though. The coolant level doesn't look like it's dropped and the oil and water do not look like they are mixing, it is very definitely a heavy white smoke (not blue or black) I don't think it is just a case of steam, there is enough white smoke under heavy acceleration when the engine is cold to smoke out an intersection. Yet once the engine has warmed up the problem totally goes away. So what does it sound like guys? Weak spark? Over fueling? Dodgy PCV valve? Any help would be great
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
its could also be moisture/dew thats settled in the exhaust tract thats isevaporating as the hot gas charges down the cold pipes? this goes double for stuff thas settled in the airbox, intake etc (you will be amazed how 'wet' a suzuki car will start and run)
not sure how a pcv would induce white smoke but the brake fluid thing could be a go, just be sure to check first if there is a hose connected between the intake and booster in the first place. i see a lot of hese disconnected/blocked off for some reason.
not sure how a pcv would induce white smoke but the brake fluid thing could be a go, just be sure to check first if there is a hose connected between the intake and booster in the first place. i see a lot of hese disconnected/blocked off for some reason.
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Resident Terrorist
Mike_1324, I had a look in the hose that goes from the brake booster to the intake manifold and it was clean as a whistle, no evidence of any oil/fluid.
cmarico and Santos, Although a possibility I think it is too much for that to be the case, it smells of petrol and it hangs in the air and doesn't disperse very easily.
JrZook, It is the 2litre V6 suzuki vitara engine (EFI). It can run a little rough sometimes when I first turn it over (not firing on all cylinders?), only takes a few revolutions of the engine before it runs normally.
I think it may be overfuelling, that's what it seems like to me, when I changed the plugs they all had a thin coat of a brownish blackish liquid which I thought (by the smell) was petrol not burning properly.
crazynic, "Valve stem seals" How do i know if this is the case? Any way to narrow it down?
RAY185, How would i know if it had a "faulty coolant temp sensor"? Also where is this sensor locate? I know it's probably a different sensor, but as a note the temp guage on the dash appears to be working just fine.
mrRocky, "head gasket ? Check oil + water levels" All seems good on that front, but I will keep an eye on it
On a NZ site I posted up the same question and two people mentioned "Very possibly oil being caught up in the splash-plate inside the rocker covers. I've heard it's common with the V6 engines." "Need to remove the covers and drill a hole for oil to flow back out (or something simple like that) from behind the splash cover."
Have any of you guys heard of/experienced that?
I know on the earlier models (1600cc) you can join two wires and get the trouble codes out of the computer, Does anyone know how to get the trouble codes on a 2000cc V6 model?
In this thread here the guy talks about trouble codes from a newer vitara: http://www.outerlimits4x4.com/ftopic175854.php
Thanks for all the help so far people
edit: oh and fuel economy seems to be poor
cmarico and Santos, Although a possibility I think it is too much for that to be the case, it smells of petrol and it hangs in the air and doesn't disperse very easily.
JrZook, It is the 2litre V6 suzuki vitara engine (EFI). It can run a little rough sometimes when I first turn it over (not firing on all cylinders?), only takes a few revolutions of the engine before it runs normally.
I think it may be overfuelling, that's what it seems like to me, when I changed the plugs they all had a thin coat of a brownish blackish liquid which I thought (by the smell) was petrol not burning properly.
crazynic, "Valve stem seals" How do i know if this is the case? Any way to narrow it down?
RAY185, How would i know if it had a "faulty coolant temp sensor"? Also where is this sensor locate? I know it's probably a different sensor, but as a note the temp guage on the dash appears to be working just fine.
mrRocky, "head gasket ? Check oil + water levels" All seems good on that front, but I will keep an eye on it
On a NZ site I posted up the same question and two people mentioned "Very possibly oil being caught up in the splash-plate inside the rocker covers. I've heard it's common with the V6 engines." "Need to remove the covers and drill a hole for oil to flow back out (or something simple like that) from behind the splash cover."
Have any of you guys heard of/experienced that?
I know on the earlier models (1600cc) you can join two wires and get the trouble codes out of the computer, Does anyone know how to get the trouble codes on a 2000cc V6 model?
In this thread here the guy talks about trouble codes from a newer vitara: http://www.outerlimits4x4.com/ftopic175854.php
Thanks for all the help so far people
edit: oh and fuel economy seems to be poor
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
We need a better definition of the smoke..
Firstly, then fact that it hangs and doesn't disperse quickly would make you think it is definitely smoke and not steam so the rules out condensation in the exhaust or a coolant leak from the headgasket.
If it was running rich or partially burnt fuel, being a petrol, the smoke would be black.
The spark plugs being fouled is more likely an indication of oil burning and the fact the were fuely would more than likely be because it wasn't firing properly due to being fouled. If they were all fouled and wet then it is probably oil as if all the plugs were fuely then none of them were firing and it wouldn't run.
Oil will get into the cylinder via a few ways, through the inlet via the engine breather, valve stem seals or rings. If it was rings then it would constantly blow smoke when revs are held up but have no oil build up in the cylinder so no smoke on cold start cold.
Valve stem seals will leak oil down the valve stem once the engine is turned off and leave a 'pool' of oil in the cylinder making it blow smoke on start up.
The engine breather will for oil in once the crankcase pressure builds up so will blow smoke after starting but not billow smoke on start up.
run it till it's warm, let it idle for ten minutes then hold the revs up around 2000rpm for 15-20 seconds. if it smokes when the revs come up then dies off after 10-15 seconds it is most likely valve stem seals.
Hope this helps, Dan
Firstly, then fact that it hangs and doesn't disperse quickly would make you think it is definitely smoke and not steam so the rules out condensation in the exhaust or a coolant leak from the headgasket.
If it was running rich or partially burnt fuel, being a petrol, the smoke would be black.
The spark plugs being fouled is more likely an indication of oil burning and the fact the were fuely would more than likely be because it wasn't firing properly due to being fouled. If they were all fouled and wet then it is probably oil as if all the plugs were fuely then none of them were firing and it wouldn't run.
Oil will get into the cylinder via a few ways, through the inlet via the engine breather, valve stem seals or rings. If it was rings then it would constantly blow smoke when revs are held up but have no oil build up in the cylinder so no smoke on cold start cold.
Valve stem seals will leak oil down the valve stem once the engine is turned off and leave a 'pool' of oil in the cylinder making it blow smoke on start up.
The engine breather will for oil in once the crankcase pressure builds up so will blow smoke after starting but not billow smoke on start up.
run it till it's warm, let it idle for ten minutes then hold the revs up around 2000rpm for 15-20 seconds. if it smokes when the revs come up then dies off after 10-15 seconds it is most likely valve stem seals.
Hope this helps, Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
You've got to remember that he lives in Christchurch, NZ. It gets really cold there at this time of year and has a very still, dry atmosphere in the morning. Not saying it's not smoke (burning something) but it could but a combination of condensation too. Just a thought...Ruffy wrote:We need a better definition of the smoke..
Firstly, then fact that it hangs and doesn't disperse quickly would make you think it is definitely smoke and not steam so the rules out condensation in the exhaust or a coolant leak from the headgasket.
Who is online
Users browsing this forum: No registered users and 72 guests