Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Replacement Steering coupling

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Replacement Steering coupling

Post by patrol man »

I seem to be braking a lot of steering couplings, (the rubber part) some times call the rag joint, does anybody know of a heavy duty one or quality after market, as it could be the second hand ones I have been fitting are just about stuffed and fail when used hard. cheers.
Living the dream on the hill that floods
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

they dont break that often unless they get covered in power steer fluid....is your car body lifted an if it is was the shaft released to suit?
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Yeh body lift has been in for a few years now, coupling was replaced not long back with a second hand unit, It broke again when the engine was off and trying to turn with no power assist, there was lots of load on it so understandable for it to fail but I am looking for something stronger, or new after market,
Living the dream on the hill that floods
Top
Posts: 51
Joined: Mon Apr 14, 2008 10:20 pm
Location: wa

Post by Renton »

as nutter said it sounds like the hub/coupling needs to be moved further down the spline of the steering shaft.
Top
Posts: 51
Joined: Mon Apr 14, 2008 10:20 pm
Location: wa

Post by Renton »

btw, i've tried to get an aftermarket rubber coupling but have had no luck. even tried a genuine one from nissan but they want to sell you a whole new hub & coupling assembly for some ridiculous amount of money.

if anyone knows where to get the rubber bit from i'd like to knoe too. i thought about making one up from some conveyor belt type rubber. anyone done this?
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

You really don't need to its not the problem, first find it then fix it don't just make it stronger, steering with power steer off does nothing short term.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

You really don't need to its not the problem, first find it then fix it don't just make it stronger, steering with power steer off does nothing short term.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 303
Joined: Wed Nov 24, 2004 8:25 pm
Location: gold coast

Post by mavzilla »

tried to find after market coupling six months ago and ended up getting second hand factory was the only answer, or nolathane red but hate that stuff
wish list (lockers,lift,endless air,winch,bar,spotties,35s,paint job,turbo,18yrs old hottie
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 8 guests