Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H runs on

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 23
Joined: Mon Mar 23, 2009 7:38 pm
Location: Northeast Vic

2H runs on

Post by GanG »

Just curious if running on is a common issue with 2H's, the old rig goes great for what it is, but when turning off, she shudders and shakes like a wet dog before she stops.

Any tips, a forum search didnt yield anything obviously related for me.

Apologies if I have doubled up on an existing thread.
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Is the fuel being cut fully?

Is there good compression on all cylinders?

Can you manually shut the fuel off? Does it shut down properly then?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Contact:
Contact Red04VXE

Re: 2H runs on

Post by Red04VXE »

GanG wrote:Just curious if running on is a common issue with 2H's, the old rig goes great for what it is, but when turning off, she shudders and shakes like a wet dog before she stops.

Any tips, a forum search didnt yield anything obviously related for me.

Apologies if I have doubled up on an existing thread.
Hey at least yours starts without a spray can.......
Image
S.E.Qld Locals Crew.....
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Select top gear, hold pedal brake, release clutch. Simple, engine stopped..
Top
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Post by SCANAS »

Common issue for sure! Check stop solenoid not working, or poor connection i'd say, mine was off in the key barrel but could be further down. Had issue with 2H powered 60 and 3B powered 42
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Top
Posts: 23
Joined: Mon Mar 23, 2009 7:38 pm
Location: Northeast Vic

Post by GanG »

Thx lads........gives me a start point, still kinda new to diesels. :)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest