Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

measuring ride height for engineering

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 43
Joined: Mon Nov 26, 2007 12:13 pm
Location: Melbourne, Victoria

measuring ride height for engineering

Post by TomZook »

Recently had the go ahead from an engineer to finish building my zook toy thing.

To save me money on the engineer having to go out and measure a standard 95' maruti ute i was hoping someone could measure theirs and take a photo of the measurement. Does not have to be exactly this year but the same model.

The engineer has requested a photo of the measurement to the bottom of the door sills, and photo of the vin plate in the engine bay of the same vehicle.

Help is appreciated. . . Tom
BIG things come in small packages
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Your Engineer should already know this :roll:

Go to http://rvcs-prodweb.dot.gov.au/pls/wwws ... ify_Search and enter the make and model then select 'All' for Status ánd click on search and it will bring up a number of variants. Select your one and look at the suspension data and it will tell you the height from centre of the hub to the top of the wheelarch for a standard vehicle as submitted for approval for use on Australian roads.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 43
Joined: Mon Nov 26, 2007 12:13 pm
Location: Melbourne, Victoria

Post by TomZook »

Thanks not a bad website, i will check whether this will be accepted
BIG things come in small packages
Top
Posts: 169
Joined: Mon Jul 14, 2008 4:20 pm
Location: CQ, Aus

Post by Zook_Fan »

it should be considering it is a government website
[quote="v840"]Do you ever think that if Hitler had targeted idiots instead of Jews, shit might have gone down a lot differently?[/quote]
Top
Posts: 43
Joined: Mon Nov 26, 2007 12:13 pm
Location: Melbourne, Victoria

Post by TomZook »

unfortunately cant use the information specified based on the gaurds being trimmed and custom tray.

Engineer specifically asked for measurement to sills.
BIG things come in small packages
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Ya Might find one on carsales in a caryard?

Then just take ya tape with you!
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

If all else fails, I have a standard height 83 LWB that I can measure off. Not sure if it's the same as a Maruti though.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

i have a standard 94 maruti with the ally tray, its full of garden rocks atm but when i empty it tomorrow i can get some pics
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

do the poor bloke a favour and jack up the body a touch too =P if the engineer cant find measurements its only fair the client's supplied ones are slightly biased towards him =P
The worst thing about censorship is ███████.
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

alien wrote:do the poor bloke a favour and jack up the body a touch too =P if the engineer cant find measurements its only fair the client's supplied ones are slightly biased towards him =P
Tyres to 50 psi, everything out of the vehicle (spare tyre etc) then measure a dead vertical measurement while the car is on a (bit of a) hill ;)
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

i'll just put a scissor jack between the springs and chassis rail, you tell me what you want the measurement to be :D
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 43
Joined: Mon Nov 26, 2007 12:13 pm
Location: Melbourne, Victoria

Post by TomZook »

cheers fellas
BIG things come in small packages
Top
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

pics tommy!!!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 8 guests