Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
where to for vitara 4sp auto adaptor
where to for vitara 4sp auto adaptor
Thinking of going down the 1.6lt efi + 4sp auto route from a Vitara into a sierra.....Does anyone know of a company does does a blanking plate for the rear of a 4sp auto to adapt to taking a jack shaft????
http://www.pirate4x4.com/forum/showthre ... highlight=
This is the type that Tim (redzook) has for his 3spd ..it is mentioned in there about the 4spd and that the same company has a similar kit to suit ..a 4spd
I used to have a spare of each auto's ( to check sizes etc)but have got rid of them , with how reliable my 4spd auto has been in the Vit .....and its copped a floggin
I know the bolt pattern are the same between them obviously ....but are the output splines and area where the TT adaptor is pressed in ..?
This is the type that Tim (redzook) has for his 3spd ..it is mentioned in there about the 4spd and that the same company has a similar kit to suit ..a 4spd
I used to have a spare of each auto's ( to check sizes etc)but have got rid of them , with how reliable my 4spd auto has been in the Vit .....and its copped a floggin
I know the bolt pattern are the same between them obviously ....but are the output splines and area where the TT adaptor is pressed in ..?
[b][i] DAN [/i] [/b]
:silly:
:silly:
Who is online
Users browsing this forum: No registered users and 2 guests