Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Chev :Edit L something, 6 litre problems ( now with pix)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Chev :Edit L something, 6 litre problems ( now with pix)

Post by RN »

Just for your info...one of our Divisonal Highway Patrol vehicles had an engine fault which was brought to the attention of the Holden Dealer. They advised to keep driving it.

The engine failed and when stripped down it was found that a hydraulic lifter had failed. New crate engine shipped down from the NT??? and installed.


Now one of our HP vehicles developed a knock and our dealer stripped the engine down to find that a hydraulic lifter had failed and stuffed the camshaft.

So, for those that have installed the 6 litre motors just be mindful if it starts to knock.

Apparently Holden are a tad concerned? The Holden Grenade? :shock:
Image
Last edited by RN on Tue May 19, 2009 11:18 pm, edited 2 times in total.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 121
Joined: Wed Dec 24, 2008 6:39 am
Location: pomona, sunny coast

Post by grinch2 »

again, you would think they would have learnt after the vt 5.7
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

So how many TMU cars are off the road at the moment :twisted: ;)
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

Is this in a VZ or VE commodore ???

hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

Post by LUX90 »

What engine oil was used in them?
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Hoppy11 wrote:Is this in a VZ or VE commodore ???

hoppy
Best of my knowledge:
Vz HSV - Ls2 (front sump, old style hedders)
Ve all - Ls2 (rear sump new hedders)

hence not l76
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Post by -Nemesis- »

But the goons still love their Chevs :finger:



My 1UZ has had about 17 different types/brands of oil in it. Has been rolled upside down. Has been heated to over 120deg C at least half a dozen times. It has 'probably' 250,000km on it. Is now running on LPG and 8psi boost and it's still going like new. :D
Lovin the FZJ105-T, bling by Ryano
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

VE , holden spec oil brand not known. Both engines suffered lifter prob. First one No 4 pot. Second engine not sure.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

The fleet should be grounded while they work through this problem. :P
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

RN wrote:VE , holden spec oil brand not known. Both engines suffered lifter prob. First one No 4 pot. Second engine not sure.
VE uses the L98 6 Lt I believe not the L76
Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

you guys must give the a flogging :D
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

This is a known oil gallery problem with late model Chev (crap) engines.
Not surprising at all. :?
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Hoppy11 wrote:
RN wrote:VE , holden spec oil brand not known. Both engines suffered lifter prob. First one No 4 pot. Second engine not sure.
VE uses the L98 6 Lt I believe not the L76
Hoppy
l76 has afm, l98 does not i beleive. Auto ve's have afm manual do not.

just what I heard last week
cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

I am no expert on the Chev, just did a bit of Google and thought it a L76...hadn't heard of the L98....( I just drive 'em).

Over my 23 yrs of HP duty there are only two cars I have really enjoyed in the fleet:

VL Turbo and the XR6 Turbo.

The VL had the most reliable engine ...ever. Smooth, effortless, unbreakable.

The torque from the Ford down low is the shizzle, the engine is just so smooth.

Still, Chev's sound beaut...only when a lifter is not knocking.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

ls1 has the least problems of any of there engines according to gm i would have expected that the 6lt would have been as good.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Here here, RN, love the VL BT1's
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Post by -Nemesis- »

After all this time with crappy old school unreliable engines, you think Holden would look back and realise that the best engine they've ever used was Japanese, like you said RN - jet.

Instead of using yank boat anchors they should have looked east.
Lovin the FZJ105-T, bling by Ryano
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

-Nemesis- wrote: Instead of using yank boat anchors they should have looked east.
Image
ooo arrest me arrest me!
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

The best holden Nissan ever made was the VL. :roll:
Posts: 95
Joined: Mon Feb 10, 2003 8:09 pm
Location: Traralgon

engine

Post by RRover85 »

bru21 wrote:
Hoppy11 wrote:
RN wrote:VE , holden spec oil brand not known. Both engines suffered lifter prob. First one No 4 pot. Second engine not sure.
VE uses the L98 6 Lt I believe not the L76
Hoppy
l76 has afm, l98 does not i beleive. Auto ve's have afm manual do not.

just what I heard last week
cheers bru
Manual VE's do have an afm, mrs's ss does anyway
Posts: 232
Joined: Tue Nov 25, 2003 1:35 am

Post by ozrunner »

matto wrote:ls1 has the least problems of any of there engines according to gm i would have expected that the 6lt would have been as good.
You have got to be kidding. If that's the case then they must have had some shockers.

The initial LS1's were oil guzzling rattling piles of puss and cost Holden an absolute fortune in warranty claims and also GM in the US. US guys were looking at undertaking a class action against GM for these ongoing issues.

Some Oz Commodoes had more than 3 complete engine changes before they got one that was half reasonable. Holden had specialised engine shops try reboring them etc to no avail as the blocks were crap so complete engines were changed under warranty but the same issues surfaced.

An eventual change to Canadian cast blocks apparently eventually resolved most issues so don't buy Mexican block LS1's.

This new issue doesn't look good for Holden if it escalates further.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

want33s wrote:The best holden Nissan ever made was the VL. :roll:
Are you trying to say fords are any better? :lol: :roll:

They are both as crap as each other, and get beaten by 4cyls in any fair race.

I saw a datsun 1200 waste a commodore V8 at a WRC demo race :D
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

ISUZUROVER wrote:
want33s wrote:The best holden Nissan ever made was the VL. :roll:
Are you trying to say fords are any better? :lol: :roll:

They are both as crap as each other, and get beaten by 4cyls in any fair race.

I saw a datsun 1200 waste a commodore V8 at a WRC demo race :D
Was this a yellow 1200 coupe, if so its not quite a 1200 motor :twisted:
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I think it was white... They said it had a 1300 or 1400 motor...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

brendan_h wrote:you guys must give the a flogging :D
of course they do.. how many times a day do you think that car would go from 0 - 100 +km/ph on a could engine..
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

RN wrote:
Over my 23 yrs of HP duty there are only two cars I have really enjoyed in the fleet:

VL Turbo
did you ever get to drive the cordias?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

Instead of using yank boat anchors they should have looked east.[/quote]

Its funny that the fastest form of motorsport still uses 1 cam and 16 pushrods ;)
Take a look at NASCAR probably the fastest sedan racing in the world. again 1 camshaft and 16 pushrods and a Carby.
No point reinventing the wheel if its no faster :D

That said the Holden motors can be pretty average but the early ones weren't as bad as everyone made out. A heap of motors were done by dealers just to make a bit of money because it was easy to a motor swap and Holden happyly paid
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

j-top paj wrote:
RN wrote:
Over my 23 yrs of HP duty there are only two cars I have really enjoyed in the fleet:

VL Turbo
did you ever get to drive the cordias?
No, not sure if they were anywhere in our fleet but perhaps interstate.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

RN wrote:
j-top paj wrote:
RN wrote:
Over my 23 yrs of HP duty there are only two cars I have really enjoyed in the fleet:

VL Turbo
did you ever get to drive the cordias?
No, not sure if they were anywhere in our fleet but perhaps interstate.
What about the evos or stis? I know you guys all complained you couldn't fit your big donut-holders in (and had to sit too close to your "customers")... but they must have driven OK???
Last edited by ISUZUROVER on Thu May 21, 2009 3:31 pm, edited 1 time in total.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

turbo gu wrote:
Its funny that the fastest form of motorsport still uses 1 cam and 16 pushrods ;)
You said what now??? I can't even begin to comprehend the levels of wrongness in that statement...

You realise that motorsport is anything that uses a motor/engine. So it includes planes, boats, etc...

Even if you want to narrow it down to WHEELED motorsport (which you didn't) - this beats your wimpy nascar:
http://en.wikipedia.org/wiki/ThrustSSC
After the record was set, the World Motor Sport Council released the following message:

The World Motor Sport Council homologated the new world land speed records set by the team ThrustSSC of Richard Noble, driver Andy Green, on 15 October 1997 at Black Rock Desert, Nevada (USA). This is the first time in history that a land vehicle has exceeded the speed of sound. The new records are as follows:

* Flying mile 1227.986 km/h (763.035 mph)
* Flying kilometre 1223.657 km/h (760.343 mph)

In setting the record, the sound barrier was broken in both the north and south runs.

Paris, 11 November 1997.
Image

Slightly higher tech than a nascar ;) - and can probably go round corners better :D
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Post Reply

Who is online

Users browsing this forum: No registered users and 63 guests