Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Disck Brake

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 92
Joined: Tue May 01, 2007 2:40 pm
Location: I don't Know Its Too Dark

Hilux Disck Brake

Post by Leighroy1984 »

Hi I have a problem with my front drivers brake disc. When I apply the brakes I get a Tick sound and when I take my foot off the brakes I get a Tick sound. When I first heard it I thought it was maybe the wheel bearings, but i replaced them and it is still there. Everything looks fine what could it be?

Hilux 1984 model :armsup:
Posts: 12
Joined: Wed Apr 08, 2009 10:35 pm
Location: Everton Hills, QLD

Post by 85sclux »

is it a tick or a bit of a knock sound my brothers had a knock sound when first braking and then when took foot off we tracked it down to be the draglink the thing from your steering box to the diff moving around under load
Posts: 92
Joined: Tue May 01, 2007 2:40 pm
Location: I don't Know Its Too Dark

Post by Leighroy1984 »

85sclux wrote:is it a tick or a bit of a knock sound my brothers had a knock sound when first braking and then when took foot off we tracked it down to be the draglink the thing from your steering box to the diff moving around under load
It is more of a Tick sound like a little stone in a tyre tick. But only happens once when brakes go on and once when brakes come off.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Sounds like you are missing an anti-rattle clip. Cant remember what the 85 lux caliper clip looks like but if you can get a shot with the wheel off looking into the caliper in the direction the pads go in I can explain better.
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

RAY185 wrote:Sounds like you are missing an anti-rattle clip. Cant remember what the 85 lux caliper clip looks like but if you can get a shot with the wheel off looking into the caliper in the direction the pads go in I can explain better.

Bam Ray185 storms the room and lights the way with his knowladge and insight

Ray shoots and he scorrreeesssss
Your spot on ray my cruisers got a similar noise its an anitrattle spring .
They are usualy eather a spring that sits under the pad or a small metal plate that the tips of the pad sit on.
More than lickly your only missing one or both on one side
in anycase pulling the other side of slowly as not to lose them as well
will show what your missing
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 92
Joined: Tue May 01, 2007 2:40 pm
Location: I don't Know Its Too Dark

Post by Leighroy1984 »

thanks guys a will have a look and let you know :BIG:
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

They have a plate that holds onto the pad retaining pins to stop them rattling as well.
Posts: 92
Joined: Tue May 01, 2007 2:40 pm
Location: I don't Know Its Too Dark

Post by Leighroy1984 »

RAY185 wrote:Sounds like you are missing an anti-rattle clip. Cant remember what the 85 lux caliper clip looks like but if you can get a shot with the wheel off looking into the caliper in the direction the pads go in I can explain better.
You wouldn't have a photo of a brake setup and what part it might be, I can't get photos of it because the wife as lost the camera. :bad-words:
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Here's a pic I found on the net. I've labeled the 2 clips/springs A and B. This is the most common setup for early cruiser and hilux. The other type has a bent plate that goes over 1 pin and under the other beween the pads.

If this is your type, it sounds to me that you are missing spring A that clips into the hole in the caliper at the middle and each end goes through the hole in the end of the pin. The ticking sounds you are hearing will be the pin jumping in the caliper hole every time you touch the brakes due to the pin not being retained by the missing spring.

Image
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

RAY185 wrote:Here's a pic I found on the net. I've labeled the 2 clips/springs A and B. This is the most common setup for early cruiser and hilux. The other type has a bent plate that goes over 1 pin and under the other beween the pads.

If this is your type, it sounds to me that you are missing spring A that clips into the hole in the caliper at the middle and each end goes through the hole in the end of the pin. The ticking sounds you are hearing will be the pin jumping in the caliper hole every time you touch the brakes due to the pin not being retained by the missing spring.

Image

That would be it
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests