Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo manifold.
Turbo manifold.
G.Day can any one tell me if a SD33 and a TD42 exhaust manifolds are the same. Cheers.
Re: Turbo manifold.
YOTATIM wrote:G.Day can any one tell me if a SD33 and a TD42 exhaust manifolds are the same. Cheers.
Not a chance!
GQ and GU TD42 will interchange though.
cheers
Re: Turbo manifold.
SD33 and SD33T manifolds are interchangeable, but the fuel injection gear is a total pain to swap over. The injection pump is cable actuated on the SD33T and vacuum actuated on the SD33. Timing gears are also different, so swapping the injection units over is a major job (do-able, but lots of work).YOTATIM wrote:G.Day can any one tell me if a SD33 and a TD42 exhaust manifolds are the same. Cheers.
Typically, you graft a turbo onto a modified SD33 manifold so you keep the vacuum actuator, butterfly and other existing control bits. You also need an oil supply line (usually from the oil pressure switch/sender) and an oil return into the sump (drilling, welding, needs to be removed from car first; sump gasket ~$60).
PM me if you are interested in a 'SD33 turbo kit' as I have set of manifolds, turbo (worn), modified sump and most of the bits that I want to get rid of. Was going to be fitted to my MQ; ended up selling that truck and getting an already turbo'ed MK.
Who is online
Users browsing this forum: No registered users and 11 guests