Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bfg m/t km tyre pressures on a vit

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 31
Joined: Sat Dec 01, 2007 11:40 am
Location: Sydney

bfg m/t km tyre pressures on a vit

Post by cossie1 »

hi, I have a brand new set of 30" bfg m/t's, what are people using them for road/mud/sand?

Tyre place put 40psi in them, but Im thinking around 32psi is a better starting point for road?
Top
david123
Banned
Posts: 690
Joined: Tue Apr 22, 2008 2:35 pm
Location: Coffin Bay

Post by david123 »

I run 31" baja claws at 22, seems to be a good wear pressure as well as a good ride, much more and its far too stiff.

On sand, 5-7psi.
If it breaks, excellent, time for an upgrade
Top
Posts: 58
Joined: Sun Oct 28, 2007 12:16 pm
Location: Perth

Post by josephbeckers »

i was told years ago to drop 2 psi for each increase in tyre size im running 30 inch bfg km2 on me lwb vitara at 26 psi and it rides just right for me anyways
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

have a play with it, but i'd be thinking 25psi onroad
Top
Posts: 343
Joined: Sun Jan 11, 2009 8:31 am
Location: south coast wa

Post by kirstyandgrace »

I run 22psi on my Sierra on road as a guide.
Maybe 24 - 26psi to allow for the extra weight.
Try various pressures and see what suits you, 32psi
would be too much imo
unemployed homeless suzuki driving fool
Top
Posts: 31
Joined: Sat Dec 01, 2007 11:40 am
Location: Sydney

Post by cossie1 »

got my pressures down to 26psi last night until i got my my last tyre... found out that the valve is faulty, not holding any air and have to get it replaced.. grrrr

anyways Ill let you know how I go with 26psi

cheers
Top
Posts: 58
Joined: Sun Oct 28, 2007 12:16 pm
Location: Perth

Post by josephbeckers »

let us know what ya think of the new muddys to
Top
eXc
Posts: 230
Joined: Tue Dec 12, 2006 9:01 am
Location: Newcastle, NSW

Post by eXc »

25psi for me with BFG AT's
Top
Posts: 736
Joined: Sun Jan 30, 2005 2:32 pm
Location: brisbane

Post by gumtree »

they always put in 40 :roll:
30 max maybe 25 maybe 22. like everyone says try and feel the ride and look phisically at the bulge. then decide what u think. what everyone is saying here is what they might use but doesnt means its the best for them or u. ive been told things on here(mainly general section) that is so far from what is ideal.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Top
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

i have a 94 2door vit with 31's..
if i run 40psi goes great. a bit bumpy, saves fuel corners great, light steering...

running 25psi chews fuel and harder steering.. and seems to give me more body roll round corners...

i run 8psi off road on rock/dirt
Top
Posts: 37
Joined: Fri Jun 06, 2008 10:47 pm
Location: Sydney

Post by fe11xx »

HOLY CRAP 40PSI?!?!?! I don't think the tyre is even supposed to be that far inflated. If you look on the tyre placard on the inside of the door jam, it recommends something like 25psi for the stock tyres. I run around 25 with my 32" BFG muddies. Any higher and I think i'd need a kidney belt.
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

Haha, the so-called tyre experts always seem to fit 'em and do the 40psi thing. 22-26 in a Sierra should be about right.
bru21 wrote:What happens in goat, stays in goat!
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

I think them pump them up to 40 to seat the bead properly.

Anyway, constantly running 40 on road in a light car will make the centre of the tyre wear out much quicker than the outer edges.
Top
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

they have a max 50psi...

not that that bad on the road to need a kidney belt..

they seem to be wearing quite evenly, had em on there for quite a while...
Top
david123
Banned
Posts: 690
Joined: Tue Apr 22, 2008 2:35 pm
Location: Coffin Bay

Post by david123 »

danssurf82 wrote:they have a max 50psi...

not that that bad on the road to need a kidney belt..

they seem to be wearing quite evenly, had em on there for quite a while...
Fuk me, have you never heard of nematic suspension.

Just because it says, MAX, does not mean a tiny light car runs that, even close.
If it breaks, excellent, time for an upgrade
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I run 35 psi on my extreme trekker pedes but only to keep the outer lugs off the road to prevent wear. I don't notice much different in ride though until I get to about 20psi or less, but these are not normal radial tyres.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

problem with less tyre pressure and standard diff ratio's and 31's it goes like a dog and really struggles up hills, chews fuel and hard steering
Top
david123
Banned
Posts: 690
Joined: Tue Apr 22, 2008 2:35 pm
Location: Coffin Bay

Post by david123 »

I can drive my Baja Claws at 5psi, with new finger, you must be extremely strength challenged.

Fair go, its a bloody car a man can lift up the front of.
If it breaks, excellent, time for an upgrade
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 89 guests