Hi, was just wondering who out there is running polyurethane bushes in their panhard rods, and what sort of life you get out of them ??
i have a 5 inch lift, and got about 5 months out of my 1st run of panhard bushes, they started to crack and get a fair bit of play, so i got a new front n rear set under warranty, and now these have lasted 3 months...
we went for a play last night, pull onto the highway afterwards and it had headshake that bad at 60ks on the entry ramp that the front wheels were screaching... so pulled up at the servo jumped under to make sure it was all tight, got a mate to wobble the steering wheel and there is about 4mm side to side play in the lower bush..
i know that genuine rubbers ones are the way to go, and thats what im getting now, couldnt be f!@ked getting more shit ones under warranty..
but seriously... 3 months???
cheers Tyler.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
DIRTY ROTTEN SH177Y polyurethane bushes in panhard rods
Who is online
Users browsing this forum: No registered users and 75 guests