hey guys
my mate recently picked up paj
he went to get a price for a body lift and they said its expensive because you need to fiddle around with the gear stick
he said it will be hard to get into 2nd 3rd and reverse
just wondering if anyone has a body lift and if they had the same problems
not shore wat model but it would be in the 1990s
thanks guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body lift
Moderator: -Scott-
i hope u trimmed the shroud not the fan, as for the gear lever, the metal surrounding the leavers may need a little bit of a trim or persuding with a hammerDanny148 wrote:hey mate, will how much is he going up?? 2 inch 3 inch?? but i have done a 2 inch body lift to my 1992 LWB paj and everything is fine all, i had to do is cut a bit off the bottom of the fan because it was hitting that plastic plate which the fan is in. thats all.
Cheers
Danny
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Re: body lift
The gearstick shouldn't be a problem, although the transfer lever could be. It can be cold-bent - it doesn't need to be cut & shut, or heated & bent. The easiest solution is to simply cut away at the hole in the floorpan / centre console.nick.gooding wrote:hey guys
my mate recently picked up paj
he went to get a price for a body lift and they said its expensive because you need to fiddle around with the gear stick
he said it will be hard to get into 2nd 3rd and reverse
just wondering if anyone has a body lift and if they had the same problems
not shore wat model but it would be in the 1990s
thanks guys
On mine, the bottom of the fan shroud simply unclipped - no tools required.
bakerboy wrote:i hope u trimmed the shroud not the fan, as for the gear lever, the metal surrounding the leavers may need a little bit of a trim or persuding with a hammerDanny148 wrote:hey mate, will how much is he going up?? 2 inch 3 inch?? but i have done a 2 inch body lift to my 1992 LWB paj and everything is fine all, i had to do is cut a bit off the bottom of the fan because it was hitting that plastic plate which the fan is in. thats all.
Cheers
Danny
yea i just trimmed the shroud not the fan
mine no probs
got a 2" B/L
just unclipped the bottom fan shroud & rotated the radiator hose clockwise
I also had the F+R bumpers lifted to match
all that was needed to do this is cut & redo the mounts wherte they bolt to the chassis
got a 2" B/L
just unclipped the bottom fan shroud & rotated the radiator hose clockwise
I also had the F+R bumpers lifted to match
all that was needed to do this is cut & redo the mounts wherte they bolt to the chassis
'98 4.5L GU ST Auto - lifted, 35's, re-geared, custom rock sliders,M winchbar, some custom parts & more to come.
V8 pajero comp truck
V8 pajero comp truck
Who is online
Users browsing this forum: No registered users and 1 guest