I am looking for alternate contact detaisl for overkill Engineering as the numbers on the website appearently dont get answered.
I have ordered some parts , months ago, and they have not turned up.
Does anyone know if sam is out of the country or what is going on?
Have tryed email and phone but i get no response even if i leave a msg.
Thanks,
Welchy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Anyone have contact details for Overkill Engineering?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Anyone have contact details for Overkill Engineering?
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Gladstone4wdclub.com.au
Try Dave off this board as he works there. Or did last i heard.
http://www.outerlimits4x4.com/profile.p ... file&u=103
http://www.outerlimits4x4.com/profile.p ... file&u=103
the travel time must be killin him now then..11 hours drive to and from work a daynottie wrote:Try Dave off this board as he works there. Or did last i heard.
http://www.outerlimits4x4.com/profile.p ... file&u=103
Re: Anyone have contact details for Overkill Engineering?
WelchyGQ wrote:I am looking for alternate contact detaisl for overkill Engineering as the numbers on the website appearently dont get answered.
I have ordered some parts , months ago, and they have not turned up.
Does anyone know if sam is out of the country or what is going on?
Have tryed email and phone but i get no response even if i leave a msg.
Thanks,
Welchy
sounds like the standard story for sam i'd say start collecting door nobs get an old pillow case and go on a road tripredzook wrote:
December 15th i called sam from overkill
and ordered the axle and 2 lower links
after lots and lots of phone calls
being told numerous times that the axle and link have been sent.
i am still yet to see anything from him
awesome customer service 6 months on and nothing delivered
so apart from the lower links on the rear and the long side axle in the rear the buggy is all done
Hence Last i heard80lsy gq wrote:the travel time must be killin him now then..11 hours drive to and from work a daynottie wrote:Try Dave off this board as he works there. Or did last i heard.
http://www.outerlimits4x4.com/profile.p ... file&u=103
Wheres he at now then Bowlsey?
im suprised this thread has gotten this far... usually by now anything about overkill has been swept under the carpet for the next unsuspecting person to stumble along wondering where their parts/money are.
as much as there may be legal reasons behind the owners of the forums removing negative feedback about a company, surely theres a way to rate businesses??? even a poll? start a closed thread called "overkill engineering" with a star rating so customers can give the place a rating out of 5... this could be done for a load of places we get our gear from and avoid the slagging matches that always go down.
as much as there may be legal reasons behind the owners of the forums removing negative feedback about a company, surely theres a way to rate businesses??? even a poll? start a closed thread called "overkill engineering" with a star rating so customers can give the place a rating out of 5... this could be done for a load of places we get our gear from and avoid the slagging matches that always go down.
The worst thing about censorship is ███████.
never gunna happen..alien wrote:im suprised this thread has gotten this far... usually by now anything about overkill has been swept under the carpet for the next unsuspecting person to stumble along wondering where their parts/money are.
as much as there may be legal reasons behind the owners of the forums removing negative feedback about a company, surely theres a way to rate businesses??? even a poll? start a closed thread called "overkill engineering" with a star rating so customers can give the place a rating out of 5... this could be done for a load of places we get our gear from and avoid the slagging matches that always go down.
one person can have a beef with a company personally and sh!t can them and cost them business for no reason when in fact they are actually a reputable company..
dave
have a nice day!
Last edited by wolfmeister on Thu Jun 11, 2009 11:51 pm, edited 1 time in total.
I may be dumb, but im ugly too
in short yes. but where have you pulled those assumptions from?wolfmeister wrote:if a pty ltd company has no assets and yet has creditors doesn't it mean they are trading insolvent?. Doesn't that also mean they are breaking the law?
they may have a mill in the bank and just bad customer service. not answering phones and slow delivery do not = insolvency. although they can be a factor.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Have a nice day
Last edited by wolfmeister on Thu Jun 11, 2009 11:52 pm, edited 1 time in total.
I may be dumb, but im ugly too
I'd be very careful chucking around accusations of insolvency without any actual proof. Pretty big leap to make to accuse someone of breaking the law. As stated badservice does not equal insolvency or breaking the law. This is now becoming a perfect example of why these threads get deleted very quickly
Ransom note = demand + collage
Have a nice day!
Last edited by wolfmeister on Thu Jun 11, 2009 11:53 pm, edited 1 time in total.
I may be dumb, but im ugly too
it's more to do with getting anyone on this site involved that's all. these days you have to be careful and the owners of this website can be held accountable by the actions and words of forum members, so it just pays to be careful and not get too deep into it that's all.
Ransom note = demand + collage
have a nice day!
Last edited by wolfmeister on Thu Jun 11, 2009 11:54 pm, edited 1 time in total.
I may be dumb, but im ugly too
Hows this....
Overkill is perhaps the last company in Aust that has existed for any decent amount of time thats is doing full on custom 4x4 fabrication. There were lots of them 5 or so years ago but none of them are around any more. The game they are in isnt easy...history has shown this to be true.
So Overkill must be doing something right.
It always surprises me that some people can have difficulty getting service from companies when hundreds of other people dont...for it me its either that these people are just unlucky, they are unreasonable or for some other reason they just have trouble interacting with an established company to get a decent result.
And for some reason threads like this one always tends to draw out the people who have an inability to get decent service.
Sam
Overkill is perhaps the last company in Aust that has existed for any decent amount of time thats is doing full on custom 4x4 fabrication. There were lots of them 5 or so years ago but none of them are around any more. The game they are in isnt easy...history has shown this to be true.
So Overkill must be doing something right.
It always surprises me that some people can have difficulty getting service from companies when hundreds of other people dont...for it me its either that these people are just unlucky, they are unreasonable or for some other reason they just have trouble interacting with an established company to get a decent result.
And for some reason threads like this one always tends to draw out the people who have an inability to get decent service.
Sam
Agreed Sam, but at the same time:
"And for some reason threads like this one always tends to draw out the people who have an inability to get decent service. "
Ordering and paying for parts that aren't received for months? There should be no trick to that from the consumers end. If Sam can't meet the demands, tell the people before accepting orders (unless he did for the numerous cases - which reverts back to your post, but a bit coincidental.)
I've only had one dealing with OE, and while it's not a positive one (apart from price) I'm not into slagging on forums, never have nor will.
"And for some reason threads like this one always tends to draw out the people who have an inability to get decent service. "
Ordering and paying for parts that aren't received for months? There should be no trick to that from the consumers end. If Sam can't meet the demands, tell the people before accepting orders (unless he did for the numerous cases - which reverts back to your post, but a bit coincidental.)
I've only had one dealing with OE, and while it's not a positive one (apart from price) I'm not into slagging on forums, never have nor will.
Lovin the FZJ105-T, bling by Ryano
nope not in this day and ageuninformed wrote:farrrrrrrrrrrrk me....
isnt this what public forums are about, letting people have a say. If 1 person comes out and bashes a good company, it wont take long for others to come to that companies defence. If 10 people are coming out and giving negative feedback, its usually for a reason........
Serg
Ransom note = demand + collage
where's the tech in this?
anyway, very rarely you hear people making an effort to say how happy they are with a business etc. Its always those who haven't had a good experience normally due to their own faults that somehow find the time to bag out a company. It's just the australian way! have a whinge!
waiting six months for parts is out of line though. Also waiting around a month for parts might be justified dependant on suppliers etc. Often there's more to the story than what is played out on the forums...
anyway, very rarely you hear people making an effort to say how happy they are with a business etc. Its always those who haven't had a good experience normally due to their own faults that somehow find the time to bag out a company. It's just the australian way! have a whinge!
waiting six months for parts is out of line though. Also waiting around a month for parts might be justified dependant on suppliers etc. Often there's more to the story than what is played out on the forums...
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
thats exactly it, i have found out that the guy i was talking about got his money back through the bank (must have paid by goldcard), but waited months for nothing so is now going to have a go at getting the part made himself, not real great business theredank wrote:where's the tech in this?
anyway, very rarely you hear people making an effort to say how happy they are with a business etc. Its always those who haven't had a good experience normally due to their own faults that somehow find the time to bag out a company. It's just the australian way! have a whinge!
waiting six months for parts is out of line though. Also waiting around a month for parts might be justified dependant on suppliers etc. Often there's more to the story than what is played out on the forums...
If you can't supply the goods, then don't offer them
Damien
--------------------------------------------------------
--------------------------------------------------------
all you really have to do is go to his website, he has a NEW number and his message bank does say to leave a message or email him, as he is rather flat out.
http://www.overkill4x4.com/
http://www.overkill4x4.com/
buggy time............
interesting
*******
EDIT by Strange Rover
Link Deleted
Keep your shiat stirring to your self...we try very hard to keep this sort of crap out of this site and for the most part we do a decent job.
Linking to this sort of crap on another forum is a different approach and we dont want that here also. If you want to stir crap do it on the other site...dont do it here.
*******
EDIT by Strange Rover
Link Deleted
Keep your shiat stirring to your self...we try very hard to keep this sort of crap out of this site and for the most part we do a decent job.
Linking to this sort of crap on another forum is a different approach and we dont want that here also. If you want to stir crap do it on the other site...dont do it here.
I may be dumb, but im ugly too
Who is online
Users browsing this forum: No registered users and 24 guests