Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff ratios

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 40
Joined: Sun Aug 22, 2004 8:43 pm
Location: Perth

diff ratios

Post by MNBS 4x4 »

Can someone tell me if 4.3 ratios from a 2.8TD GU fit into a '99 4.5 petrol with standard 3.9 ratios, is everything a straight swap over or is there more to it.

cheers
Top
Posts: 51
Joined: Mon May 14, 2007 5:20 pm
Location: sydney

Post by brettsGQ »

yeah bud its a straight swap of centers not tomuch work just pull your axles and put out the centers and swap over and your done
93 GQ patrol td42 turbo'd ,auto, 4 in springs, 2 in body 35 claws, front locker & 4.6's, wheelers fabrications bar work all round.........
Top
Posts: 51
Joined: Mon May 14, 2007 5:20 pm
Location: sydney

Post by brettsGQ »

but that is with your hole centre not just crown gear if you just have the gear sets its a lot more work as you have to pull out the hemisphere and press out the pinion gear your better to pay someone to do it for you as you have to shim it in and do the lash and stuff
93 GQ patrol td42 turbo'd ,auto, 4 in springs, 2 in body 35 claws, front locker & 4.6's, wheelers fabrications bar work all round.........
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

you may want to check the bits or build plate on the car, pretty sure 2.8 would have 4.6's
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 40
Joined: Sun Aug 22, 2004 8:43 pm
Location: Perth

Post by MNBS 4x4 »

NutterGQ wrote:you may want to check the bits or build plate on the car, pretty sure 2.8 would have 4.6's
Thanks for that, i thought that 2.8's had 4.6 aswell, is there a way to tell what ratios they are , it is just the crown wheel and pinion

cheers
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

on the drown wheel it will have a code stamped, cant remember what it is exactly, but it will be like 37:9 you devide the larger number by the smaller and you will get the ratio, the above will get you a 4.11 ratio

someone will chime in with exact codes,
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Re: diff ratios

Post by weeman »

MNBS 4x4 wrote:Can someone tell me if 4.3 ratios from a 2.8TD GU fit into a '99 4.5 petrol with standard 3.9 ratios, is everything a straight swap over or is there more to it.

cheers
the 2.8 will be 4.6 ratios...

they should bolt up as long as you have a small rear diff in your petrol gu...
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 42
Joined: Thu Oct 07, 2004 4:32 pm
Location: Mitcham

diffs

Post by busman »

The pinion flanges on the 4.6 ratio diffs out of the 2.8 are smaller and will need to be swapped so you can bolt your tail shaft in.
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

the compliance plate has a line that says axle and on that it will have 43, 46 etc, and the RB30 and RD28 have smaller front tailshaft using a navara size uni joint
My bitch has boost, Nutter Engineering Turbo GQ
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 88 guests