Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bj73 body mount question...with hi tech drawings.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

bj73 body mount question...with hi tech drawings.

Post by sprungupcruiser »

hey lads got another question. doing a body lift on the cruiser and i have found 10 of the mounts and the body won't move. am i missing one? see the hi tech drawing below for the mounts i have found.
Image
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Is there anything else connected like steering or fuel hoses stopping it.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

yeah i looked at that. couldn't see anything that would be holing it down.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

make sure the gearsticks arent fouling on anything,check radiator is alright too ?
best to look all over it and disconnect anything thats attached to the body unless you can see it has enough flex in it .
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

found the problem. thanks guys. she's all done now.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Now you can put some decent boots on her let me know when your keen for a run so we can put some pin striping on the other side.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

yeah mate for sure. still got a few other things to finish off and then will be good to go.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest