Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coily front struts

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
mur
Posts: 12
Joined: Mon Jun 04, 2007 8:20 pm
Location: Melbourne

Coily front struts

Post by mur »

G'day,
Ive got a mate who just bought a coily.
He doesnt intent to do much to it. Just 40mm or so lift and 235/75R15s at the most.
Does anyone have info on reinforcing the top mounts of the front struts?
There are no problems as yet, yet we jsut want to avoid potential problems in the future.
thanks
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

i rekon just plating around the holes at the top would be the go, this is what happens to them. even welding on a thick washer would be the go

Image
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

spamwell wrote:even welding on a thick washer would be the go
That was adequate on the one I repaired.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
mur
Posts: 12
Joined: Mon Jun 04, 2007 8:20 pm
Location: Melbourne

Post by mur »

thanks. looks like a easy enough fix
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

So long as you can train some mice to weld.

The repair I did was on a car with a bodylift and it was still very tight to get in there- That was from on top. From underneath, you'll have to deal with welding upside down into a cup with the shock and springs removed, and then deal witht e gap between the washer and the domed shape of the factory mount.

Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
mur
Posts: 12
Joined: Mon Jun 04, 2007 8:20 pm
Location: Melbourne

Post by mur »

lol
ok, Maybe not that easy....
Top
Posts: 1
Joined: Mon Dec 15, 2008 4:12 pm
Location: Newcastle NSW

Post by ShaunosZuk »

Is this a common problem with coily's?

Does it only happen after bigger springs have been fitted?

Cheers
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Yes it is a common problem.
My guess is the springs have less to do with it than the shocks. A higher shock rate will transmit more force into the mount, causing fatigue quicker.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest