Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series cruiser runnning 315/75/r16. issues?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 17
Joined: Mon Mar 30, 2009 7:04 pm
Location: S.E melbourne

80 series cruiser runnning 315/75/r16. issues?

Post by bushhogg4x4 »

just wondering if there are problems runnning 315/75.r16 (35:12.5:r16) on standard 80 series steel silver rims. or do u need an offset?
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

should be ok with minimum 2" lift. the rears will rub a bit on full articulation.
Free air locker to the first 20 callers!
Top
Posts: 17
Joined: Mon Mar 30, 2009 7:04 pm
Location: S.E melbourne

Post by bushhogg4x4 »

sounds good anyone else have any ideas?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

dude, ive ran them with a 2 inch lift, best idea is to buy ROH sunny rims with 27 offset for a 60 series in 16x8, that moves the tyre away from the inner guard of the rear and it rubs less....also widens track for more stability....or use std rims and live with it...causes no dramas...
Andrew
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 17
Joined: Mon Mar 30, 2009 7:04 pm
Location: S.E melbourne

Post by bushhogg4x4 »

thnx guys. just deal with the std an get a lift.
Top
Posts: 17
Joined: Mon Mar 30, 2009 7:04 pm
Location: S.E melbourne

Post by bushhogg4x4 »

uhhhh forgot to mention they are going on an 80 series not my 60..... :S
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest